ASTM D1244-98(2020)

6.1 The two orders of notation are presented to satisfy two separate needs encountered in the textile industry and in textile technology. The single-to-ply notation meets the needs of yarn manufacturers to describe a single yarn, or a plied or cabled yarn primarily in terms of its manufacturing specifications. The ply-to-single notation, based on the resultant yarn number, meets the needs of users of yarn who have relatively little interest in the linear density or twist of the single yarn component(s) but are interested mainly in the final product. The chief difference between the two notations is the order in which the information is presented. In this practice the same symbols are used for both notations and retain their usual mathematical meanings.

6.2 The single-to-ply notation is prescribed for yarns numbered in both direct and indirect yarn numbering systems and conforms with current usage in large sections of the textile industry. The ply-to-single notation is prescribed for yarns numbered in a direct yarn numbering system and its use is approved by the ISO/TC 38 in Document N362. This latter notation has not been included previously in Practice D1244. The ply-to-single notation has not been recommended for use with yarns numbered in indirect yarn numbering systems because of possible confusion when symbols are used with different meanings in different notations or used in conflict with their established mathematical significance.

6.3 At first glance, the recommended notation may appear rather involved, but in actuality it is a concise method for describing complex structures. For example, compare the following description of a yarn: “A cabled yarn or cord with a resultant cotton count of 1.4 and 5 turns per inch of Z twist made from 3 strands of plied yarn with 9 turns per inch of S twist each plied from 5 strands of 24 cotton count yarn with 15 turns per inch of Z twist and spun from 1¹/₁₆ in. staple, graded strict low middling, and having a Micronaire reading of 4.3” with the description of the same yarn stated in Example 23,

6.4 ASTM recommends (see Practice D861), the general use of the tex universal yarn numbering system.

6.5 The designation of a numbering system, for example, cotton count, woolen run, and linen lea, does not restrict the yarn composition to the named fiber. See Example 5.

6.6 The terms used to designate different yarn numbering systems are frequently abbreviated. See 4.13 – 4.16.

6.7 The various yarn numbering 1.1 This practice covers instructions for the designation of yarn construction and is applicable to single yarns, plied yarns, and cabled yarns or cords of filaments or spun fibers. The application of the practice to specific cases is illustrated with examples. This practice does not cover the description of novelty yarns or core spun yarns of various types.

1.2 The primary purpose of this practice is to establish a reference system for use in the trade and particularly for use in correspondence and publications. To secure a simplified notation, certain portions may be omitted provided there is no doubt as to the omitted parts.

1.3 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.