Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
NORMA vydaná dňa 1.11.2021
Označenie normy: ASTM D1218-21
Dátum vydania normy: 1.11.2021
Kód tovaru: NS-1041885
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
refractive dispersion, refractive index, refractometer,, ICS Number Code 75.080 (Petroleum products in general)
Significance and Use | ||||||||||||
5.1?Refractive index and refractive dispersion are fundamental physical properties, which can be used in conjunction with other properties to characterize pure hydrocarbons and their mixtures. |
||||||||||||
1. Scope | ||||||||||||
1.1?This test method covers the measurement of refractive index, accurate to four decimal places or better, of transparent and light-colored hydrocarbons in the range of 1.3300 to 1.5000 at temperatures from 20 ?C to 30 ?C by manual (optical-mechanical) or automatic (digital) procedure. 1.2?The manual (optical-mechanical) procedure also covers the measurement of refractive dispersion accurate to the fourth decimal place or better. Note 1:?The test method may be suitable for measuring the
refractive indices of liquids above 1.5000 and at temperatures both
below 20 ?C and above 30 ?C; however, the test method precision may
not apply. Verification of the accuracy of such measurements will
depend upon the availability of reliable, certified reference
standards that demonstrate the performance of the instrument used
under the particular measuring conditions.
1.3?The test method may not be applicable to liquids that are strongly colored, or that have bubble points so near the test temperature that a reading cannot be obtained before substantial weathering takes place. Liquid color should be limited to No. 4 ASTM Color or lighter, as determined by Test Method D1500. 1.4?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5?1.6? This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Posledná aktualizácia: 2024-12-22 (Počet položiek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.