Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM D1039-16

Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation

NORMA vydaná dňa 1.11.2016

Jazyk
Prevedenie	Online zabezpečené PDF - 75.20 € Tlačené - 75.20 €
Dostupnosť	SKLADOM
Cena	75.20 € bez DPH
75.20 €

Informácie o norme:

Označenie normy: ASTM D1039-16
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2016
Kód tovaru: NS-667272
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Materiály na bázi slídy

Anotácia textu normy ASTM D1039-16 :

Keywords:

arc resistance, compressive strength, dielectric strength, dilatometry, dissipation factor, glass-bonded mica, heat distortion, impact resistance, interferometry, linear thermal expansion, mica, modulus of rupture, permittivity, porosity, resistivity, Rockwell hardness, specific gravity, synthetic mica, tensile strength, thermal conductivity ,, ICS Number Code 29.035.50 (Mica based insulating materials)

Doplňujúce informácie

Significance and Use

6.1 This characteristic is useful for specification purposes and has utility as a quality control parameter.

1. Scope

1.1 These test methods cover the evaluation of the characteristics of glass-bonded, natural, or synthetic mica materials intended for use as electrical insulation.

1.2 Glass bonded mica materials are commercially available in both injection molded and compression molded types. These test methods are applicable to both types except for tensile strength methods. (See Section 41.)

1.3 The test methods appear in the following sections:

Test Method

Section

ASTM Test Method

Arc Resistance

57 – 59

D495

Compressive Strength

33 – 35

D695

Conditioning

D618

Dielectric Strength

48 – 51

D149

Dissipation Factor

43 – 47

D150 and D2149

Heat Distortion Temperature

24 – 29

D648

Impact Resistance

36 – 39

D256

Modulus of Rupture

30 – 32

D790 and C674

Permittivity

43 – 47

D150 and D2149

Porosity

13 – 16

D116

Resistivity, Volume and Surface

52 – 56

D257

Rockwell Hardness

10 – 12

D785

Specific Gravity

6 – 9

D792

Specimens

Tensile Strength

40 – 42

D638 and D651

Terminology

D1711

Thermal Conductivity

17 – 19

C177 and E1225

Thermal Expansion

20 – 23

E228 and E289

Thickness

49 and 54

D374

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See also Sections 45, 49, 54, and 58.

2. Referenced Documents

E228-22	Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
E289-25	Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
E1225-25a	Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique (Includes all amendments and changes 9/19/2025).
D785-23	Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
D6054-97	Standard Practice for Conditioning Electrical Insulating Materials for Testing
D2149-13(2021)	Standard Test Method for Permittivity (Dielectric Constant) and Dissipation Factor of Solid Dielectrics at Frequencies to 10 MHz and Temperatures to 500 ?C
D1711-25a	Standard Terminology Relating to Electrical Insulation (Includes all amendments and changes 12/12/2025).
D792-20	Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
D790-25	Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D495-22	Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
C674-13(2023)	Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
C177-19e1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
D374-99	Standard Test Methods for Thickness of Solid Electrical Insulation
D257-14(2021)e1	Standard Test Methods for DC Resistance or Conductance of Insulating Materials (Includes all amendments and changes 5/6/2021).
D256-26	Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
D150-22	Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
D149-25	Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D116-86(2025)	Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
D695-26	Standard Test Method for Compressive Properties of Rigid Plastics
D651-84	Method of Test for Tensile Strength of Molded Electrical Insulating Materials (Withdrawn 1989)
D648-18	Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
D618-21	Standard Practice for Conditioning Plastics for Testing
D638-22	Standard Test Method for Tensile Properties of Plastics

Doporučujeme: