Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
Automaticky preložený názov:
Štandardné špecifikácie pre epoxidové živice - BASE systémy väzby na betón
NORMA vydaná dňa 1.12.2013
Označenie normy: ASTM C881/C881M-13
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.12.2013
Kód tovaru: NS-15446
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
bonding, bonding systems, contact strength, contact time, epoxy resin, ICS Number Code 91.100.30 (Concrete and concrete products)
1. Scope | ||||||||||||||||
1.1 This specification covers two-component, epoxy-resin bonding systems for application to portland-cement concrete, which are able to cure under humid conditions and bond to damp surfaces. 1.2 This specification does not cover epoxy-resin-base bonding systems that have been modified by addition of components such as cement, fine aggregate, or fiber reinforcement. Additional testing may be required to meet applicable specifications for these applications. 1.3 This specification does not address the effects of creep on epoxy-resin-base bonding systems while under load or the potential for creep rupture. Additional testing is required for applications where creep and creep rupture are critical. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Some values have only SI units because the inch-pound equivalents are not used in practice. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with this standard. 1.5 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Test Method for Thermal
Compatibility Between Concrete and an Epoxy-Resin Overlay Standard Test Method for Water Absorption
of Plastics Standard Test Method for Tensile
Properties of Plastics Standard Test Method for Deflection
Temperature of Plastics Under Flexural Load in the Edgewise
Position Standard Test Method for Compressive
Properties of Rigid Plastics Standard Test Method for Apparent
Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
Using Rotational Viscometry Test Method for Linear Shrinkage of Cured
Thermosetting Casting Resins During Cure Standard Test Method for Bond Strength of
Epoxy-Resin Systems Used With Concrete By Slant Shear |
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.