Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets
Automaticky preložený názov:
Štandardné skúšobné metódy pre chemický, hmotnostná spektrometria a spectrochemical Analýza jadrovej-Grade oxidu hlinitého a AluminumOxide-karbid bóru Composite Pellets
NORMA vydaná dňa 1.1.2013
Označenie normy: ASTM C809-13
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.1.2013
Kód tovaru: NS-15148
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
alumina/boron carbide pellets, alumina pellets, A12O3, A12O3/B4C, analytical methods, ICS Number Code 27.120.30 (Fissile materials and nuclear fuel technology)
Significance and Use | ||||||||||||||||||||
3.1 Aluminum oxide pellets are used in a reactor core as filler or spacers within fuel, burnable poison, or control rods. In order to be suitable for this purpose, the material must meet certain criteria for impurity content. These test methods are designed to show whether or not a given material meets the specifications for these items as described in Specification C785. 3.1.1 Impurity content is determined to ensure that the maximum concentration limit of certain impurity elements is not exceeded. 3.2 Aluminum oxide-boron carbide composite pellets are used in a reactor core as a component in neutron absorber rods. In order to be suitable for this purpose, the material must meet certain criteria for boron content, isotopic composition, and impurity content as described in Specification C784. 3.2.1 The material is assayed for boron to determine whether the boron content is as specified by the purchaser. 3.2.2 Determination of the isotopic content of the boron is made to establish whether the 10B concentration is in compliance with the purchaser's specifications. 3.2.3 Impurity content is determined to ensure that the maximum concentration limit of certain impurity elements is not exceeded. |
||||||||||||||||||||
1. Scope | ||||||||||||||||||||
1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade aluminum oxide and aluminum oxide-boron carbide composite pellets to determine compliance with specifications. 1.2 The analytical procedures appear in the following order:
1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (For specific precautionary statements, see Section 5.) |
||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||
|
Historická
1.6.2010
Historická
1.6.2010
Historická
1.1.2014
Historická
1.1.2012
Historická
1.6.2011
Historická
1.6.2010
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-12-23 (Počet položiek: 2 217 157)
© Copyright 2024 NORMSERVIS s.r.o.