Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM C361M-22

Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)

NORMA vydaná dňa 1.9.2022

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 95.20 € PDF + redline - ihneď - 114.30 € Tlačené - 95.20 € Tlač + redline - 114.30 €
Dostupnosť	SKLADOM
Cena	95.20 € bez DPH
95.20 €

Informácie o norme:

Označenie normy: ASTM C361M-22
Dátum vydania normy: 1.9.2022
Kód tovaru: NS-1083894
Počet strán: 26
Približná hmotnosť: 78 g (0.17 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Trubky a fitinky z ostatních materiálů

Anotácia textu normy ASTM C361M-22 :

This specification covers reinforced concrete low-head pressure pipe. Acceptability of the pipe in all diameters and classes shall be determined by the results of such material tests. The reinforced concrete shall consist of Portland cement, mineral aggregates, and water, in which steel has been embedded in such a manner that the steel and concrete act together. Portland cement shall conform to the requirements specified. Aggregates shall conform to the requirements specified, except that the requirements for grading are waived. Admixtures, except for air-entraining agents, shall not be added to the concrete unless permitted by the owner. Reinforcement shall consist of wire conforming to the requirements prescribed. Steel castings for fittings shall conform to grade 70-36. Steel plates for specials and fittings shall conform to requirements specified. All rubber gaskets shall be extruded or molded and cured in such a manner that any cross section will be dense, homogeneous, and free of porosity, blisters, pitting, and other imperfections. Joints shall utilize steel joint rings, steel bells and concrete spigots, or be formed entirely of concrete. The aggregates shall be graded, proportioned, and thoroughly mixed with the proportions of cementitious material and water that will produce a workable, uniform, homogeneous concrete mixture. Compression tests of cylinders and hydrostatic tests of pipes shall be performed to meet the requirements prescribed.

Keywords:

ICS Number Code 23.040.50 (Pipes and fittings of other materials)

Doplňujúce informácie

1. Scope

1.1?This specification covers reinforced concrete pipe intended to be used for the construction of pressure pipelines with low internal hydrostatic heads generally not exceeding 375 kPa.

1.2?This specification is the SI companion to Specification C361. It is compatible in technical content.

Note 1:?Field tests on completed portions of the pipeline are not covered by this specification for the manufacture of the pipe but should be included in specifications for pipe laying.

1.3?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

C618-23e1	Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete (Includes all amendments and changes 3/21/2023).
C595/C595M-23	Standard Specification for Blended Hydraulic Cements
C822-21	Standard Terminology Relating to Concrete Pipe and Related Products
C1602/C1602M-22	Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
C1619-23	Standard Specification for Elastomeric Seals for Joining Concrete Structures
D698-12(2021)	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
D4253-16e1	Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table (Includes all amendments and changes 11/21/2019).
D4254-16	Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ACI Code 318	Standard Building Code Requirements for Reinforced Concrete Available from American Concrete Institute (ACI), P.O. Box 9094, Farmington Hills, MI 48333-9094, http://www.concrete.org.
A283/A283M-24	Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A496-A496M-07	Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement (Withdrawn 2013)
A497/A497M-07:2007/ADJA0185	Adjunct to A185 Steel Welded Wire Reinforcement, Plain, for Concrete and A497 Steel Wire, Deformed, for Concrete Reinforcement
A575-20	Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A576-23	Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A615/A615M-22	Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A27/A27M-20	Standard Specification for Steel Castings, Carbon, for General Application
A36/A36M-19	Standard Specification for Carbon Structural Steel
A82-A82M-07	Standard Specification for Steel Wire, Plain, for Concrete Reinforcement (Withdrawn 2013)
A185/A185M-07:2007/ADJA0185	Adjunct to A185 Steel Welded Wire Reinforcement, Plain, for Concrete and A497 Steel Wire, Deformed, for Concrete Reinforcement
A1011/A1011M-23	Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
C31/C31M-24	Standard Practice for Making and Curing Concrete Test Specimens in the Field
C33/C33M-23	Standard Specification for Concrete Aggregates
C39/C39M-23	Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
A675/A675M-14(2019)	Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A1008/A1008M-23e1	Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable (Includes all amendments and changes 12/29/2023).
C150/C150M-22	Standard Specification for Portland Cement
C260/C260M-10a(2016)	Standard Specification for Air-Entraining Admixtures for Concrete (Includes all amendments and changes 12/27/2016).
C309-19	Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
C497M-20a	Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric) (Includes all amendments and changes 5/21/2020).
AISI-C1012 Available from the American Iron and Steel Institute (AISI), 1140 Connecticut Ave. NW, Suite 705, Washington D.C. 20036, http://www.steel.org.

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.