Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM C1193-00

Standard Guide for Use of Joint Sealants

Automaticky preložený názov:

Štandardné Príručka pre využitie spoločných tmelov

NORMA vydaná dňa 10.6.2000

Jazyk
Prevedenie	Online zabezpečené PDF - 107.60 € Tlačené - 107.60 €
Dostupnosť	SKLADOM
Cena	107.60 € bez DPH
107.60 €

Informácie o norme:

Označenie normy: ASTM C1193-00
Poznámka: NEPLATNÁ
Dátum vydania normy: 10.6.2000
Kód tovaru: NS-9952
Počet strán: 32
Približná hmotnosť: 96 g (0.21 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Anotácia textu normy ASTM C1193-00 :

Keywords:

guide, joint sealant, sealant design, sealant geometry, ICS Number Code 91.100.50 (Binders. Sealing materials)

Doplňujúce informácie

1. Scope

1.1 This guide describes the use of single and multicomponent, cold-applied joint sealants for parallel joint sealing applications in buildings and related adjacent areas, such as plazas, decks, and pavements for vehicular or pedestrian use, and types of construction other than highways and airfield pavements and bridges.

1.2 The elastomeric or non-elastomeric sealants described by this guide meet the requirements of Specifications C834, C920, and C1085.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only.

1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Notes 1 and 2.

2. Referenced Documents

E2114-23	Standard Terminology for Sustainability
C919-24	Standard Practice for Use of Sealants in Acoustical Applications
C920-18(2024)	Standard Specification for Elastomeric Joint Sealants
C1083-06(2020)e1	Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials (Includes all amendments and changes 9/13/2023).
C1087-23	Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1135-19(2024)	Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1184-23	Standard Specification for Structural Silicone Sealants
C1216-03	Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1241-14(2022)	Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
C1247-20	Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1248-22	Standard Test Method for Staining of Porous Substrate by Joint Sealants
C1249-18(2023)	Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C510-16(2022)	Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C603-14(2026)	Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C661-15(2022)	Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C711-22	Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C731-15(2022)	Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
C732-17(2022)	Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C734-15(2024)	Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C717-25	Standard Terminology of Building Seals and Sealants
C792-23	Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C719-22	Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C793-23	Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C794-18(2022)	Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C834-17(2023)	Standard Specification for Latex Sealants
C1253-14(2019)	Standard Test Method for Determining the Outgassing Potential of Sealant Backing
C1257-15(2023)	Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1265-22	Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1311-22	Standard Specification for Solvent Release Sealants
C1330-23	Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
C1369-25	Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1382-16(2023)	Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1401-23	Standard Guide for Structural Sealant Glazing
C1442-14(2021)	Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1472-16(2022)	Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1481-12(2024)	Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
C1519-10(2026)	Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
C1521-19(2025)	Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
C1681-23	Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
D412-16(2021)	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
D624-00(2020)	Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
D2203-01(2023)	Standard Test Method for Staining from Sealants
D2453-15	Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.