Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM C110-20

Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

NORMA vydaná dňa 1.12.2020

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 109.10 € Tlačené - 109.10 €
Dostupnosť	SKLADOM
Cena	109.10 € bez DPH
109.10 €

Informácie o norme:

Označenie normy: ASTM C110-20
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.12.2020
Kód tovaru: NS-1029142
Počet strán: 26
Približná hmotnosť: 78 g (0.17 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Cement. Sádra. Vápno. Malta

Anotácia textu normy ASTM C110-20 :

Keywords:

accepted reference value, accuracy, apparent density, BET, bias, calcium hydroxide, dry brightness, dry screening, fineness, flue gas treatment, hydrated lime, interlaboratory study, lime putty, limestone grindability, magnesium hydroxide, particle size, precision, precision conditions, repeatability, reproducibility, slaking rate, specific surface area, standard deviation,, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)

Doplňujúce informácie

1. Scope

1.1?These test methods cover physical testing of quicklime and hydrated lime, and of limestone not otherwise covered in ASTM standards.2

Note 1:?Quicklime and hydrated lime have a high affinity for moisture and carbon dioxide. Caution should be taken to protect both hydrated and quicklime during sampling, storage, and testing (see Practice C50).

1.2?The test methods appear in the following order:

Plastic Property Testing

Standard Consistency of Lime Putty

Plasticity of Lime Putty

Water Retention of Hydrated Lime

Air Entrainment

Soundness Testing

Autoclave Expansion of Hydrated and Hydraulic Lime

Popping and Pitting of Hydrated Lime

Application Testing

Slaking Rate of Quicklime

Dry Brightness of Pulverized Limestone

Limestone Grindability Determination by the Laboratory Ball Mill
??Method

Settling Rate of Hydrated Lime

Particle Size Analysis

Residue and Sieve Analysis

Sieve Analysis of Dry Limestone, Quicklime, and Hydrated Lime

Fineness of Pulverized Quicklime and Hydrated Lime by Air
??Permeability

Particle Size of Pulverized Limestone

Dry Screening of Hydrated Lime, Pulverized Quicklime, and
??Limestone by Air Jet Sieving

Wet Sieve Analysis of Agricultural Liming Materials

Density Measurement

Apparent Loose Density of Hydrated Lime, Pulverized Quicklime,
??and Limestone

Apparent Packed Density of Hydrated Lime, Pulverized Quicklime,
??and Limestone

Relative Density (Specific Gravity) of Hydrated Lime Products

1.3?The values stated in SI units are to be regarded as standard. The values given in brackets are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.

1.4?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

C28/C28M-10(2020)	Standard Specification for Gypsum Plasters
C472-20	Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete
C430-17	Standard Test Method for Fineness of Hydraulic Cement by the 45-µm (No. 325) Sieve
C305-20	Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C231-09	Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C230/C230M-23	Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
C207-18	Standard Specification for Hydrated Lime for Masonry Purposes
C204-24	Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
C192/C192M-19	Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
C188-17(2023)	Standard Test Method for Density of Hydraulic Cement
C185-20	Standard Test Method for Air Content of Hydraulic Cement Mortar
C595-08	Standard Specification for Blended Hydraulic Cements
C51-23	Standard Terminology Relating to Lime and Limestone (as Used by the Industry)
C91-05	Standard Specification for Masonry Cement
C109/C109M-23	Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50?mm [2 in.] Cube Specimens)
C136-06	Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C50-00	Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C670-24a	Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials (Includes all amendments and changes 3/11/2024).
C702-98	Standard Practice for Reducing Samples of Aggregate to Testing Size
C778-21	Standard Specification for Standard Sand
C1005-20	Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
C1107-05	Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
D75-03	Standard Practice for Sampling Aggregates
E11-22	Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E177-20	Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E691-23	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
C150-07	Standard Specification for Portland Cement

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.