Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
Automaticky preložený názov:
Štandardné špecifikácie pre tenkú dyhu Brick jednotiek z hlinenej alebo bridlice
NORMA vydaná dňa 1.2.2014
Označenie normy: ASTM C1088-14
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.2.2014
Kód tovaru: NS-9402
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
appearance requirements, clay, fired masonry units, masonry, physical properties, shale, thin brick, ICS Number Code 91.100.15 (Mineral materials and products)
1. Scope | ||||||
1.1 This specification covers thin veneer brick units made from clay, shale, fire clay, sand, or mixtures thereof, and fired to incipient fusion for use in adhered or fastened veneer applications. Three types of thin veneer brick units in each of two grades are covered. In this specification, the term thin veneer brick shall be understood to mean clay masonry unit with a maximum thickness of 13/4 in. (44.45 mm). 1.2 The property requirements of
this specification apply at the time of purchase. The use of
results from testing of brick extracted from masonry structures for
determining conformance or nonconformance to the property
requirements (Section 1.3 Brick covered by this
specification are manufactured from clay, shale, or similar
naturally occurring substances and subjected to a heat treatment at
elevated temperatures (firing). The heat treatment must develop
sufficient fired bond between the particulate constituents to
provide the strength and durability requirements of the
specification. (See “firing” and “fired bond” in Terminology
C1232.)
1.4 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.4.2009
Historická
1.11.2006
Historická
1.11.2011
Historická
1.4.2009
Historická
1.2.2014
Historická
1.6.2014
Posledná aktualizácia: 2024-11-04 (Počet položiek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.