Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM B988-13

Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components

Automaticky preložený názov:

Štandard Specification pre práškovej metalurgie (PM), titán a zliatiny titánu štrukturálnej zložky

NORMA vydaná dňa 1.4.2013

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 70.20 € Tlačené - 70.20 €
Dostupnosť	SKLADOM
Cena	70.20 € bez DPH
70.20 €

Informácie o norme:

Označenie normy: ASTM B988-13
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2013
Kód tovaru: NS-8993
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Prášková metalurgie

Anotácia textu normy ASTM B988-13 :

Keywords:

CIP, cold isostatic pressing, compaction, HIP, hot isostatic pressing, PIF, pneumatic isostatic forging, powder forging, powder metallurgy, powder roll compaction, pre-alloyed powder, sinter, structural components, Ti Grade 1, Ti Grade 2, Ti Grade 3, Ti Grade 4, Ti-6Al4V, Ti-6A1-6V-2Sn, Ti 3Al2.5V, titanium, titanium alloys, titanium powder, ICS Number Code 77.160 (Powder metallurgy)

Doplňujúce informácie

1. Scope

1.1 This specification covers powder metallurgy (PM) structural components fabricated from:

1.1.1 Commercially pure (CP) (that is, unalloyed) titanium powder,

1.1.2 Pre-alloyed powders.

1.1.3 Mixtures of elemental powders or mixtures of elemental powders and pre-alloyed powders.

1.2 This specification covers:

1.2.1 Grade 1 PM—Unalloyed titanium,

1.2.2 Grade 2 PM—Unalloyed titanium,

1.2.3 Grade 3 PM—Unalloyed titanium,

1.2.4 Grade 4 PM—Unalloyed titanium,

1.2.5 Grade 5 PM—Titanium alloy (6% aluminum, 4% vanadium),

1.2.6 Grade 9 PM—Titanium alloy (3% aluminum, 2.5% vanadium),

1.2.7 Ti-6Al-4V PM Low Interstitial (LI),

1.2.8 Ti-6Al-6V-2Sn PM.

1.3 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E2371-21a	Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) (Includes all amendments and changes 1/6/2022).
E2626-08	Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
B243-23	Standard Terminology of Powder Metallurgy
B311-22	Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
B348-13	Standard Specification for Titanium and Titanium Alloy Bars and Billets
B923-23	Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
E1941-10(2016)	Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
E8/E8M-24	Standard Test Methods for Tension Testing of Metallic Materials
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E539-19	Standard Test Method for Analysis of Titanium Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E1409-13(2021)	Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
E1447-22	Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry
B962-23	Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.