Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM B983-13
Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
Automaticky preložený názov:
Štandardné špecifikácie pre zrážok zakalený či tvárnenie za studena , bezšvíkové zliatiny niklu Potrubné
NORMA vydaná dňa 1.2.2013
Informácie o norme:
Označenie normy: ASTM B983-13
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.2.2013
Kód tovaru: NS-8986
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Anotácia textu normy ASTM B983-13 :
Keywords:
seamless cold worked pipe, seamless cold worked tube, seamless precipitation hardened pipe, seamless precipitation hardened tube, UNS N07022, UNS N07725, UNS N07740, UNS N09945, UNS N09925, UNS N07718, UNS N10276, UNS N06985, ICS Number Code 23.040.15 (Non-ferrous metal pipes)
Doplňujúce informácie
| 1. Scope | ||||||||
|
1.1 This specification covers high strength, seamless pipe and tube of nickel alloys (UNS N07022, UNS N07725, UNS N07740, UNS N09945, UNS N09925, UNS N07718, UNS N10276, UNS N06985) Element |
UNS |
UNS |
UNS |
UNS |
UNS |
UNS |
UNS |
UNS |
|
Carbon |
0.010 max |
0.03 max |
0.005-0.08 |
0.005-0.04 |
0.03 max |
0.08 max |
0.02 max |
0.015 max |
|
Manganese |
0.5 max |
0.35 max |
1.0 max |
1.0 max |
1.00 max |
0.35 max |
1.0 max |
1.0 max |
|
Silicon |
0.08 max |
0.20 max |
1.0 max |
0.5 max |
0.50 max |
0.35 max |
0.08 max |
1.0 max |
|
Phosphorous |
0.025 max |
0.015 max |
0.03 max |
0.03 max |
... |
0.015 max |
0.030 max |
0.04 max |
|
Sulfur |
0.015 max |
0.010 max |
0.03 max |
0.03 max |
0.030 max |
0.015 max |
0.030 max |
0.03 max |
|
Chromium |
20.0-21.4 |
19.0-22.5 |
23.5-25.5 |
19.5-23.0 |
19.5-23.5 |
17.0-21.0 |
14.5-16.5 |
21.0-23.5 |
|
Cobalt |
1.0 max |
... |
15.0-22.0 |
... |
... |
1.0 max |
2.5 max |
5.0 max |
|
Molybdenum |
15.5-17.4 |
7.00-9.50 |
2.0 max |
3.0-4.0 |
2.50-3.50 |
2.80-3.30 |
15.0-17.0 |
6.0-8.0 |
|
Columbium |
... |
2.75-4.00 |
... |
2.4-4.5 |
0.50 max |
4.75-5.50 |
... |
... |
|
Titanium |
... |
1.00-1.70 |
0.5-2.5 |
0.5-2.5 |
1.90-2.40 |
0.65-1.15 |
... |
... |
|
Aluminum |
0.5 max |
0.35 max |
0.2-2.0 |
0.01-0.7 |
0.10-0.50 |
2.20-0.80 |
... |
... |
|
Zirconium |
... |
... |
... |
... |
... |
... |
... |
... |
|
Boron |
0.006 max |
... |
0.0006–0.006 |
... |
... |
0.006 max |
... |
... |
|
Iron |
1.8 max |
RemainderB |
3.0 max |
RemainderB |
22.0 minA |
RemainderB |
4.0-7.0 |
18.0-21.0 |
|
Copper |
0.5 max |
... |
0.50 max |
1.5-3.0 |
1.50-3.00 |
0.30 max |
... |
1.5-2.5 |
|
Nickel |
RemainderB |
55.0–59.0 |
RemainderB |
45.0-55.0 |
38.0-46.0 |
50.0-55.0 |
RemainderB |
RemainderB |
|
Tantalum |
0.2 max |
... |
... |
... |
... |
... |
... |
... |
|
Tungsten |
0.8 max |
... |
... |
... |
... |
... |
3.0-4.5 |
1.5 max |
|
Columbium + |
... |
... |
0.50–2.5 |
... |
... |
... |
... |
0.50 max |
|
Vanadium |
... |
... |
... |
... |
... |
... |
0.35 max |
... |
1.2 Pipe and tube shall be supplied
in the cold worked or cold worked and precipitations hardened or
solution annealed plus precipitation hardened and descaled
conditions. When atmosphere control is used, descaling is not
necessary.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
|
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
|
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
|
|
Standard Test Methods for Tension Testing of Metallic Materials |
|
|
Standard Terminology Relating to Non-ferrous Metals and Alloys |
Odporúčame:
Aktualizácia technických noriem
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
