Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM B834-15
Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts
Automaticky preložený názov:
Štandardné špecifikácie pre tlakové Konsolidované práškové hutníctva železa - nikel - chróm - molybdén ( UNS N08367 ) , nikel - chróm - molybdén - columbium ( Nb ) ( UNS N06625 ) , nikel - chróm - železo zliatiny ( UNS N06600 a N06690 ) , a niklovo chróm- Iron - niób - molybdén ( UNS N07718 ) Liate rúrky príruby, armatúry, ventily, a náhradné diely
NORMA vydaná dňa 1.10.2015
Informácie o norme:
Označenie normy: ASTM B834-15
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2015
Kód tovaru: NS-618466
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM B834-15 :
Keywords:
compact, iron-nickel-chromium-molybdenum, nickel-chromium-iron, nickel-chromium-iron-columbium-molybdenum, nickel-chromium-molybdenum-columbium, powder parts, pressure consolidated powder metallurgy, UNS N06600, UNS N06625, UNS N06690, UNS N07718, UNS N08367,, ICS Number Code 23.040.15 (Non-ferrous metal pipes)
Doplňujúce informácie
| 1. Scope | ||||||||||||||
|
1.1 This specification covers pressure consolidated powder metallurgy iron-nickel-chromium-molybdenum (UNS N08367) and nickel-chromium-molybdenumcolumbium (Nb) (UNS N06625), nickel-chromium-iron alloys (UNS N06600 and N06690), and nickel-chromium-iron-columbium (Nb)-molybdenum (UNS N07718) alloy pipe flanges, fittings, valves, and parts intended for general corrosion or heat-resisting service. 1.1.1 UNS N06625 products are furnished in two grades of different heat-treated conditions: 1.1.1.1 Grade 1 (annealed)—Material is normally employed in service temperatures up to 1100°F (593°C). 1.1.1.2 Grade 2 (solution annealed)—Material is normally employed in service temperatures above 1100°F (593°C) when resistance to creep and rupture is required. 1.2 UNS N08367 products are furnished in the solution annealed condition. 1.3 UNS N06600 products are furnished in the annealed condition. 1.4 UNS N06690 products are furnished in the annealed condition. 1.5 UNS N07718 products are furnished in the solution annealed + precipitation hardened condition. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following safety hazards caveat pertains
only to test methods portions, Sections 7.3 and 13, of this specification:
Standard Test Methods for Tension Testing
of Metallic Materials SP-25 Standard Marking System for Valves,
Fittings, Flanges, and Unions Standard Test Methods for Pitting and
Crevice Corrosion Resistance of Stainless Steels and Related Alloys
by Use of Ferric Chloride Solution Standard Test Methods for Detecting
Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich,
Chromium-Bearing Alloys ASME/ANSI B16.5 Standard Test Methods for Chemical
Analysis of Nickel, Cobalt, and High-Temperature Alloys Standard Practice for Using Significant
Digits in Test Data to Determine Conformance with
Specifications |
Doporučujeme:
