Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM B775/B775M-19
Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
NORMA vydaná dňa 1.4.2019
Informácie o norme:
Označenie normy: ASTM B775/B775M-19
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2019
Kód tovaru: NS-945903
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM B775/B775M-19 :
Keywords:
welded pipe,, ICS Number Code 77.150.40 (Nickel and chromium products)
Doplňujúce informácie
| 1. Scope | |
|
1.1 This specification contains various requirements that, with the exception of Section 5 and Section 10, are mandatory requirements to the following ASTM nickel and nickel alloy, longitudinally welded piping specifications: Title of Specification |
ASTM
|
|
Welded UNS N08020 Alloy Pipe |
B464/B464M |
|
Welded Nickel-Iron-Chromium Alloy Pipe |
B514 |
|
Welded Nickel-Chromium-Iron-Alloy (UNS
N06600, |
B517 |
|
Welded Nickel and Nickel-Cobalt Alloy Pipe |
B619/B619M |
|
UNS N08904, UNS N08925, and UNS N08926 Welded Pipe |
B673 |
|
UNS N08367 Welded Pipe |
B675 |
|
Nickel-Alloy (UNS N06625, N06219, and N08825) Welded Pipe |
B705 |
|
Ni-Cr-Mo-Co-W-Fe-Si Alloy (UNS N06333) Welded Pipe |
B723 |
|
Welded Nickel (UNS N02200/UNS N02201) and
Nickel |
B725 |
1.2 One or more of the test requirements of Section 5 apply only if specifically stated in the product specification or in the purchase order.
1.3 In case of conflict between a requirement of the product specification and a requirement of this general specification, only the requirement of the product specification needs to be satisfied.
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
|
Standard Test Methods for Rockwell Hardness of Metallic Materials |
|
|
Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe |
|
|
Standard Specification for Welded Nickel-Chromium-Iron-Alloy Pipe |
|
|
Standard Specification for Nickel-Iron-Chromium-Molybdenum and Iron-Nickel-Chromium-Molybdenum-Copper Welded Pipe |
|
|
Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy Welded Pipe |
|
|
Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe |
|
|
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Pipe |
|
|
Standard Specification for Welded Nickel and Nickel Copper Alloy Pipe |
|
|
Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys |
|
|
Standard Terminology Relating to Non-ferrous Metals and Alloys |
|
|
Standard Test Methods for Tension Testing of Metallic Materials |
|
|
Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip (Includes all amendments and changes 10/20/2022). |
|
|
Standard Specification for Welded UNS N08020 Alloy Pipe |
|
|
Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe |
|
|
Standard Test Methods for Chemical Analysis of Nickel-Copper Alloys (Withdrawn 2003) |
|
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
|
|
Methods for Chemical Analysis of Nickel (Withdrawn 1995) |
|
|
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
|
|
Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
|
|
Standard Test Methods for Determining Average Grain Size |
|
|
Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing |
|
|
B36.19 |
Stainless Steel Pipe |
|
SAE J 1086 |
Practice for Numbering Metals and Alloys (UNS) |
|
Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys |
|
|
B1.20.1 |
Pipe Threads |
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
