Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM B637-12

Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

Automaticky preložený názov:

Štandardné špecifikácie pre zrážok - kalenie a tvárnenie za studena zo zliatiny niklu Bary, výkovkov , a prírezy pre kovanie pre stredné alebo vysoká teplota služby

NORMA vydaná dňa 1.5.2012

Jazyk
Prevedenie	Online zabezpečené PDF - 73.50 € Tlačené - 73.50 €
Dostupnosť	SKLADOM
Cena	73.50 € bez DPH
73.50 €

Informácie o norme:

Označenie normy: ASTM B637-12
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.5.2012
Kód tovaru: NS-7518
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Anotácia textu normy ASTM B637-12 :

Keywords:

bar, billet, forging, N07001, N07022, N07208, N07080, N07252, N07500, N07718, N07725, N07750, N07752, N09925, Bars/forging/forging stock--specifications, Forgings--specifications, High-temperature service applications--nickel (specifications), Incoloy/Inconel, Nickel alloy forgings--specifications, Nickel alloy rod/bar/wire--specifications, Nimonic 80A alloy, Precipitation-hardening nickel alloy--specifications, Udimet alloy, UNS N07001 (Ni-Cr alloy, Waspaloy)

Doplňujúce informácie

1. Scope

1.1 This specification covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for moderate or high temperature service (Table 1).

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

TABLE 1 Chemical Requirements


Element	Composition Limits, %
	UNS N07022	UNS N07208	UNS N07252 (Formerly Grade 689)	UNS N07001 (Formerly Grade 685)	UNS N07500 (Formerly Grade 684)	UNS N07750 (Formerly Grade 688)	UNS N07718 (Formerly Grade 718)
Carbon	0.010 max	0.04–0.08	0.10–0.20	0.03–0.10	0.15 max	0.08 max	0.08 max
Manganese	0.5 max	0.3 max	0.50 max	1.00 max	0.75 max	1.00 max	0.35 max
Silicon	0.08 max	0.15 max	0.50 max	0.75 max	0.75 max	0.50 max	0.35 max
Phosphorus	0.025 max	0.015 max	0.015 max	0.030 max	0.015 max	...	0.015 max
Sulfur	0.015 max	0.015 max	0.015 max	0.030 max	0.015 max	0.01 max	0.015 max
Chromium	20.0–21.4	18.5–20.5	18.00–20.00	18.00–21.00	15.00–20.00	14.00–17.00	17.0–21.0
Cobalt	1.0 max	9.0–11.0	9.00–11.00	12.00–15.00	13.00–20.00	1.00 max^A	1.0 max^A
Molybdenum	15.5–17.4	8.0–9.0	9.00–10.50	3.50–5.00	3.00–5.00	...	2.80–3.30
Columbium (Nb) + tantalum	...	...	...	...	...	0.70–1.20	4.75–5.50
Titanium	...	1.90–2.30	2.25–2.75	2.75–3.25	2.50–3.25	2.25–2.75	0.65–1.15
Aluminum	0.5 max	1.38–1.65	0.75–1.25	1.20–1.60	2.50–3.25	0.40–1.00	0.20–0.80
Zirconium	...	0.020 max	...	0.02–0.12	...	...	...
Boron	0.006 max	0.003–0.010	0.003–0.01	0.003–0.01	0.003–0.01	...	0.006 max
Iron	1.8 max	1.5 max	5.00 max	2.00 max	4.00 max	5.00–9.00	remainder^B
Copper	0.5 max	0.1 max	...	0.50 max	0.15 max	0.50 max	0.30 max
Nickel	remainder^B	remainder^B	remainder^B	remainder^B	remainder^B	70.00 min	50.0–55.0
Tantalum	0.2 max	0.1 max	...	...	...	...	...
Columbium (Niobium)	...	0.2 max	...	...	...	...	...
Tungsten	0.8 max	0.5 max	...	...	...	...	...
	UNS N07080 (Formerly Grade 80A)	UNS N07752	UNS N09925	UNS N07725
Carbon	0.10 max	0.020–0.060	0.03 max	0.03 max
Manganese	1.00 max	1.00 max	1.0 max	0.35 max
Silicon	1.00 max	0.50 max	0.5 max	0.20 max
Phosphorus	...	0.008 max	0.03 max	0.015 max
Sulfur	0.015 max	0.003 max	0.03 max	0.010 max
Chromium	18.00–21.00	14.50–17.00	19.5–22.5†	19.00–22.50†
Cobalt	...	0.050 max	...	...
Molybdenum	...	...	2.5–3.5	7.00–9.50
Columbium (Nb) + tantalum	...	0.70–1.20	0.5 max (Nb only)	2.75–4.00
Titanium	1.80–2.70	2.25–2.75	1.9–2.40	1.00–1.70
Aluminum	0.50–1.80	0.40–1.00	0.1–0.5	0.35 max
Boron	...	0.007 max	...	...
Iron	3.00 max	5.00–9.00	22.0 min	remainder^B
Copper	...	0.50 max	1.5–3.0	...
Zirconium	...	0.050 max	...	...
Vanadium	...	70.0 min	...	...
Nickel	remainder^B	70.0 min	42.0–46.0	55.0–59.0

^A If determined.

^B The element shall be determined arithmetically by difference.

† Chromium content was corrected editorially.

2. Referenced Documents

E8-04	Standard Test Methods for Tension Testing of Metallic Materials
B880-24	Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
E1473-22	Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
E139-24	Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.