Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
Automaticky preložený názov:
Štandardné Špecifikácie pre zvárané UNS N08120 , UNS N08800 , UNS N08810 , a UNS N08811 zliatin Tubes
NORMA vydaná dňa 1.10.2009
Označenie normy: ASTM B515-95(2009)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2009
Kód tovaru: NS-6997
Počet strán: 2
Približná hmotnosť: 6 g (0.01 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
UNS N08120, UNS N08800, UNS N08810, UNS N08811, welded tube, Condenser and heat exchanger systems--nickel alloy, Corrosive service applications--tube (Ni/Ni alloys), High-temperature service applications--nickel (specifications), Nickel-iron alloy--specifications, Nickel-iron-chromium alloys--specifications, UNS N08120 (Ni-Fe-Cr alloy, HR-120), UNS N08800 (Fe-Ni-Cr alloy, Incoloy 800), UNS N08810 (Fe-Ni-Cr alloy, Incoloy 800H), Welded Ni/Ni alloy tube--specifications
1. Scope | ||
1.1 This specification covers welded UNS N08120, UNS N08800, UNS N08810 and UNS N08811* alloy boiler, heat exchanger, and condenser tubes for general corrosion resisting and low or high-temperature service. 1.2 This specification covers tubes 1/8 to 5 in. (3.18 to 127 mm), inclusive, in outside diameter and 0.015 to 0.500 in. (0.38 to 12.70 mm), inclusive, in wall thickness. Table 2 of Specification B 751 lists the dimensional requirements of these sizes. Tubes having other dimensions may be furnished provided such tubing complies with all other requirements of this specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and heal practices, and determine the applicability of regulatory limitations prior to use. |
||
2. Referenced Documents | ||
|
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.