Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube (Includes all amendments And changes 10/8/2014).
Automaticky preložený názov:
Štandardné špecifikácie pre niklu , železa a chrómu bezšvíkových rúr ,
NORMA vydaná dňa 1.11.2008
Označenie normy: ASTM B407-08a
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2008
Kód tovaru: NS-6578
Počet strán: 8
Približná hmotnosť: 24 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
seamless pipe, seamless tube, UNS N08120, UNS N08800, UNS N08801, UNS N08810, UNS N08811, UNS N08890, UNS N06811, Nickel-iron alloy--specifications, Nickel-iron-chromium alloys--specifications, Seamless Ni alloy pipe--specifications, Seamless Ni alloy tube--specifications, UNS N08120 (Ni-Fe-Cr alloy, HR-120), UNS N08800 (Fe-Ni-Cr alloy, Incoloy 800), UNS N08801 (Fe-Ni-Cr alloy, Incoloy 801)), UNS N08810 (Fe-Ni-Cr alloy, Incoloy 800H), UNS N08811 (wrought Ni-Fe-Cr alloy, Incoloy 800HT)
1. Scope | ||||
1.1 This specification covers UNS N08120, UNS N08800, UNS N08801, UNS N08810, UNS N08811, UNS N08890, and UNS N06811 in the form of cold-worked and hot-finished annealed seamless pipe and tube. Alloys UNS N08800 and UNS N06811 are normally employed in service temperatures up to and including 1100°F (593°C). Alloys UNS N08120, UNS N08810, UNS N08811, and UNS N08890 are normally employed in service temperatures above 1100°F (593°C) where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in this temperature range. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazards caveat pertains only to the test method portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations. |
||||
2. Referenced Documents | ||||
|
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.