Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Nickel-Molybdenum Alloy Rod
Automaticky preložený názov:
Štandardné špecifikácie pre nikel-molybdén Rod
NORMA vydaná dňa 1.2.2013
Označenie normy: ASTM B335-03(2013)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.2.2013
Kód tovaru: NS-6278
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
rod, N10001, N10624, N10629, N10665, N10675, ICS Number Code 77.150.40 (Nickel and chromium products)
1. Scope | |||||
1.1 This specification2 covers rod of nickel-molybdenum alloys (UNS N10001, N10665, N10675, N10629, and N10624)* as shown in Element |
Composition Limits, % |
|
|||
Alloy |
Alloy |
Alloy |
Alloy |
Alloy |
|
Nickel |
remainderA |
remainderA |
65.0 min |
remainderA |
Bal |
Molybdenum |
26.0–30.0 |
26.0–30.0 |
27.0–32.0 |
26.0–30.0 |
21.0-25.0 |
Iron |
4.0–6.0 |
2.0 max |
1.0–3.0 |
1.0–6.0 |
5.0-8.0 |
Chromium |
1.0 max |
1.0 max |
1.0–3.0 |
0.5–1.5 |
6.0-10.0 |
Carbon, |
0.05 |
0.02 |
0.01 |
0.01 |
0.01 |
Silicon, max |
1.0 |
0.10 |
0.10 |
0.05 |
0.10 |
Cobalt, max |
2.5 |
1.00 |
3.0 |
2.5 |
1.0 |
Manganese, |
1.0 |
1.0 |
3.0 |
1.5 |
1.0 |
Phosphorus, |
0.04 |
0.04 |
0.030 |
0.04 |
0.025 |
Sulfur, max |
0.03 |
0.03 |
0.010 |
0.01 |
0.01 |
Vanadium |
0.2–0.4 |
... |
0.20 max |
... |
... |
Nickel plus |
... |
... |
94.0–98.0 |
|
... |
Aluminum |
... |
... |
0.50 max |
0.1–0.5 |
0.5 |
Columbium |
... |
... |
0.20 |
|
... |
Copper, max |
... |
... |
0.20 |
0.5 |
0.5 |
Tantalum, |
... |
... |
0.20 |
|
... |
Titanium, |
... |
... |
0.20 |
|
... |
Tungsten, |
... |
... |
3.0 |
|
... |
Zirconium, |
... |
... |
0.10 |
|
... |
Magnesium, |
... |
... |
... |
... |
... |
1.2.1 Rods 5/16 to 3/4 in. (7.94 to 19.05 mm) excl in diameter, hot or cold finished, solution annealed and pickled or mechanically descaled.
1.2.2 Rods 3/4 to 31/2 in. (19.05 to 88.9 mm) incl in diameter, hot or cold finished, solution annealed, ground or turned.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition |
|
Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys |
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
|
Standard Test Methods for Tension Testing of Metallic Materials |
|
Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys |
Historická
1.10.2009
Historická
1.10.2011
Historická
1.3.2008
Historická
1.10.2011
Historická
1.10.2011
Historická
1.10.2011
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-04-30 (Počet položiek: 2 896 468)
© Copyright 2024 NORMSERVIS s.r.o.