Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM B279-13(2019)
Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
NORMA vydaná dňa 1.10.2019
Informácie o norme:
Označenie normy: ASTM B279-13(2019)
Dátum vydania normy: 1.10.2019
Kód tovaru: NS-972319
Počet strán: 2
Približná hmotnosť: 6 g (0.01 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM B279-13(2019) :
Keywords:
aluminum wire, copper wire, soft square and rectangular aluminum wire, soft square and rectangular copper wire,, ICS Number Code 29.060.10 (Wires)
Doplňujúce informácie
| Significance and Use | ||
|
3.1 This test method is designed as an inspection or acceptance test of new bare soft square and rectangular wire intended for subsequent fabrication into magnet wire. Note 1: Since the applied unit stress and the time of
application are constant for all wire sizes, the test enables
comparisons of stiffness to be made between wires of the same or
different size on the basis of the permanent elongation resulting
from the application of a low unit stress.
|
||
| 1. Scope | ||
|
1.1 This test method, known as the low-stress elongation (LSE) test, covers the procedure for determining the stiffness of bare soft square and rectangular copper and aluminum wire in terms of the permanent elongation resulting from the application of a tensile stress. 1.2 The SI values for the mass of the specimen are regarded as the standard. For all other properties, the inch-pound values are to be regarded as standard and the SI units may be approximate. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||
| 2. Referenced Documents | ||
|
Doporučujeme:
