ASTM B92/B92M-11..
ASTM B93/B93M-09..
ASTM B94-13
ASTM B951-11
ASTM E2869-13
ASTM G97-97(2013)..
Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM B199-12
Standard Specification for Magnesium-Alloy Permanent Mold Castings
Automaticky preložený názov:
Štandard Specification pre zliatiny horčíka trvalé formy Odliatky
NORMA vydaná dňa 1.11.2012
Informácie o norme:
Označenie normy: ASTM B199-12
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2012
Kód tovaru: NS-5680
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM B199-12 :
Keywords:
casting grade, certification, chemical compositions, ductility, gravity die castings, low pressure die castings, ordering information, rejection criteria, strength requirements, tensile properties, ICS Number Code 77.150.20 (Magnesium products)
Doplňujúce informácie
| 1. Scope | |||||||||||||
|
1.1 This specification covers magnesium alloy permanent mold casting alloys designated as shown in Alloy NumberB |
Composition, % |
||||||||||||
|
ASTM |
UNS |
Iron |
Magnesium |
Aluminum |
Manganese |
Zinc |
Rare Earths |
Zirconium |
Silicon |
Copper |
Nickel |
TotalC |
Others |
|
AM100A |
M10100 |
... |
remainder |
9.3 to 10.7 |
0.10–0.35 |
0.30 |
... |
... |
0.30 |
0.10 |
0.01 |
0.30 |
... |
|
AZ81A |
M11810 |
... |
remainder |
7.0 to 8.1 |
0.13–0.35 |
0.40 to 1.0 |
... |
... |
0.30 |
0.10 |
0.01 |
0.30 |
... |
|
AZ91C |
M11914 |
... |
remainder |
8.1 to 9.3 |
0.13–0.35 |
0.40 to 1.0 |
... |
... |
0.30 |
0.10 |
0.01 |
0.30 |
... |
|
AZ91E |
M11919 |
0.005D |
remainder |
8.1 to 9.3 |
0.17–0.35 |
0.40 to 1.0 |
... |
... |
0.20 |
0.015 |
0.0010 |
0.30 |
0.01 |
|
AZ92A |
M11920 |
... |
remainder |
8.3 to 9.7 |
0.10–0.35 |
1.6 to 2.4 |
... |
... |
0.30 |
0.25 |
0.01 |
0.30 |
... |
|
EQ21AE |
M18330 |
... |
remainder |
... |
... |
... |
1.5 to 3.0F |
0.40 to 1.0 |
... |
0.05–0.10 |
0.01 |
0.30 |
... |
|
EZ33A |
M12330 |
... |
remainder |
... |
... |
2.0 to 3.1 |
2.5 to 4.0 |
0.50 to 1.0 |
... |
0.10 |
0.01 |
0.30 |
... |
|
QE22AG |
M18220E |
... |
remainder |
... |
... |
... |
1.8 to 2.5F |
0.40 to 1.0 |
... |
0.10 |
0.01 |
0.30 |
... |
1.2 The values stated in inch-pound
units are to be regarded as the standard. The SI values given in
parentheses are provided for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
|
AMS 2768 |
Heat Treatment of Magnesium Alloy Castings |
|
Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis |
|
|
Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought |
|
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
|
|
Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition |
|
|
Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
|
|
Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry |
|
|
Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
|
|
Standard Test Methods for Tension Testing of Metallic Materials |
|
|
Standard Guide for Radiographic Examination |
|
|
Fed. Std. No. 123 |
Marking for Shipment (Civil Agencies) Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://www.dodssp.daps.mil. |
|
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
|
|
Standard Practice for Liquid Penetrant Examination for General Industry |
|
|
Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
|
|
Standard Practice for Heat Treatment of Magnesium Alloys |
|
|
Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought |
Podobné normy:
Historická
1.5.2011
Historická
7.12.2009
Historická
1.5.2013
Historická
1.11.2011
Historická
1.6.2013
Historická
1.5.2013
Odporúčame:
Aktualizácia technických noriem
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
