Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM A933/A933M-14 1.5.2014 náhľad

Doplňujúce informácie

ASTM A933/A933M-14

Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement (Withdrawn 2016)

Automaticky preložený názov:

Štandard Specification pre Vinyl oceľový drôt potiahnutý a zvárané výstuže

NORMA vydaná dňa 1.5.2014

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 79.90 € Tlačené - 79.90 €
Dostupnosť	SKLADOM
Cena	79.90 € bez DPH
79.90 €

Informácie o norme:

Označenie normy: ASTM A933/A933M-14
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.5.2014
Kód tovaru: NS-4878
Počet strán: 10
Približná hmotnosť: 30 g (0.07 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Oceli pro vyztužování betonu

Anotácia textu normy ASTM A933/A933M-14 :

Keywords:

coating requirements, concrete reinforcement, corrosion resistance, steel wire, vinyl coating, welded wire reinforcement, ICS Number Code 77.140.15 (Steels for reinforcement of concrete)

Doplňujúce informácie

1. Scope

1.1 This specification covers plain and deformed steel wire and plain and deformed steel welded wire reinforcement with protective vinyl (polyvinyl chloride, or polyvinyl chloride powder compound) coating. A Class A minimum coating thickness is required for wire and welded wire reinforcement intended for use in concrete and masonry. A Class B minimum coating thickness is required for wire and welded wire reinforcement intended for use in mechanically stabilized earth applications.

1.2 Other thermoplastic organic coatings may be used provided they meet the requirements of this specification.

1.3 Requirements for coatings are contained in 1.4 Requirements for patching materials are contained in 1.5 The text of this specification contains notes or footnotes, or both, that provide explanatory material. Such notes and footnotes, excluding those in tables or figures, do not contain any mandatory requirements.

1.6 This specification is applicable for orders in either inch-pound units (as Specification A933) or in SI units [as Specification A933M].

1.7 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

2. Referenced Documents

SSPC-PA2	Measurement of Dry Coating Thickness with Magnetic Gages
TM-01-70	Visual Standard for Surfaces of New Steel Air Blast Cleaned with Sand Abrasive (NACE No. 2)
RP-287-87	Field Measurement of Surface Profile of Abrasive Blast Cleaned Steel Surface Using a Replica Tape
G20-10(2019)	Standard Test Method for Chemical Resistance of Pipeline Coatings
G14-04(2018)	Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
G12-07	Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
G8-24	Standard Test Methods for Cathodic Disbonding of Coated Steel
D4060-19	Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
D2967-07(2017)	Standard Test Method for Corner Coverage of Powder Coatings
D2240-15(2021)	Standard Test Method for Rubber Property—Durometer Hardness
D374-99	Standard Test Methods for Thickness of Solid Electrical Insulation
B117-19	Standard Practice for Operating Salt Spray (Fog) Apparatus
A1064/A1064M-22	Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
TM-01-75	Visual Standard for Surfaces of New Steel Centrifugally Blast Cleaned with Steel Shot or Steel Grit (NACE No. 2)
A884/A884M-19e1	Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement (Includes all amendments and changes 9/23/2020).
A775/A775M-22	Standard Specification for Epoxy-Coated Steel Reinforcing Bars
SSPC-SP 10	Near-White Blast Cleaning
SSPC-Vis?2	Standard Methods of Evaluating Degree of Rusting on Painted Steel Surfaces
SSPC-Vis?1	Pictorial Surface Preparation Standards for Painting Steel Surfaces

Podobné normy:

ASTM A820/A820M-11..

Historická
1.10.2011

ASTM A881/A881M-10..

Historická
1.12.2010

ASTM A886/A886M-12..

Historická
15.11.2012

ASTM A910/A910M-12..

Historická
15.11.2012

ASTM A911/A911M-11..

Historická
15.1.2011

ASTM A934/A934M-13..

Historická
1.6.2013

Odporúčame:

EviZak - všetky zákony vrátane ich evidencie na jednom mieste

Poskytovanie aktuálnych informácií o legislatívnych predpisoch vyhlásených v Zbierke zákonov od roku 1945.
Aktualizácia 2x v mesiaci !

Chcete vedieť viac informácii ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.