Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Tension Testing of Wire Ropes and Strand
Automaticky preložený názov:
Štandardná skúšobná metóda pre Tension skúšanie oceľových lán a Strand
NORMA vydaná dňa 1.4.2013
Označenie normy: ASTM A931-08(2013)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2013
Kód tovaru: NS-4867
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
socket, thermo-set resin, wire rope, ICS Number Code 77.140.65 (Steel wire, wir ropes and link chains)
Significance and Use | ||||||||||||||||
4.1 Wire rope tests are generally to be performed on new rope. The use of wire rope in any application can reduce individual wire strengths due to abrasion and nicking that will result in the wire rope strength being reduced. Damage to the outer wires will also lower the maximum strength achieved during tension testing. 4.2 The modulus of elasticity of wire rope is not considered to be a standard requirement at this time. The determination of this material property requires specialized equipment and techniques. 4.3 Rope to be tested should be thoroughly examined to verify that no external wire damage is present. If present, it should be noted. When possible, a new undamaged sample should be obtained for testing. 4.4 End attachments and their installation can directly affect breaking force achieved during testing. Any attachment that can be used to directly achieve the required rope breaking force can be used. Standard testing with a poured socket, using zinc, white metal or thermoset resin, has been considered the most efficient. Proficiency in attachment of any fitting can have a direct effect on the final test results. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1 This test method covers the tension testing of wire ropes and strand at room temperature, specifically to determine the measured breaking force, yield strength, elongation, and modulus of elasticity. Methods described in this standard are not intended for other purposes. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Specification for
Metallic-Coated Parallel and Helical Steel Wire Structural
Strand Standard Terminology Relating to Methods
of Mechanical Testing (Includes all amendments and changes
3/29/2023). Standard Test Methods for Tension Testing
of Metallic Materials ISO 17558 Specification for Steel Wire Ropes -
Socketing Procedures - Molten Metal and Resin Socketing Standard Specification for
Metallic-Coated Steel Structural Wire Rope Standard Specification for Carbon Steel
Wire Ropes for General Purposes Standard Specification for Zinc Standard Practices for Force Calibration
and Verification of Testing Machines |
Historická
1.7.2010
Historická
1.4.2014
Historická
1.12.2011
Historická
1.10.2013
Historická
1.3.2012
Historická
1.3.2013
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.