Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM A924/A924M-10

Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

Automaticky preložený názov:

Štandardné špecifikácie pre všeobecné požiadavky na oceľový plech , Metallic - potiahnuté Hot - Dip Process

NORMA vydaná dňa 1.6.2010

Jazyk
Prevedenie	Online zabezpečené PDF - 82.00 € Tlačené - 82.00 €
Dostupnosť	SKLADOM
Cena	82.00 € bez DPH
82.00 €

Informácie o norme:

Označenie normy: ASTM A924/A924M-10
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.6.2010
Kód tovaru: NS-4833
Počet strán: 12
Približná hmotnosť: 36 g (0.08 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Anotácia textu normy ASTM A924/A924M-10 :

Keywords:

aluminum-coated iron/steel, aluminum-zinc alloy-coated steel, 55 %, coating, coatingsaluminum, coatings55 % aluminum-zinc, coatingshot-dip, coatingsmetallic, coatingsterne metal, coatingszinc (hot-dip), coatingszinc-5 % aluminum, coatingszinc-aluminum-magnesium, corrosion, hot-dip, metallic-coated, sheet, steel, steel productshot-dip coatings, steel sheetaluminum-coated, steel sheetterne coated, steel sheetzinc-aluminum-magnesium alloy-coated, steel sheetzinc-coated (galvanized)

Doplňujúce informácie

1. Scope

1.1 This specification covers the general requirements that, unless otherwise specified in the product specification, apply to steel sheet in coils and cut lengths, metallic-coated on continuous lines by the hot-dip process. The product is intended for applications requiring corrosion resistance. The product specifications contain requirements for specific strength levels, heat resistance, paintability, or formability, or a combination thereof.

1.2 Subject to individual product specification provisions, steel sheet is available as Commercial Steel (CS) Types A, B, and C, Forming Steel (FS), Drawing Steel (DS), Deep Drawing Steel (DDS), Extra Deep Drawing Steel (EDDS), High Temperature Steel (HTS), Structural Steel (SS), and High Strength Low Alloy Steel (HSLAS). Steel sheet is produced with the following metallic coatings. Specific information on each of the following is contained in the individual product specification:

1.2.1 Zinc or zinc-iron alloy coated,

1.2.2 Zinc-5 % aluminum alloy coated,

1.2.3 55 % aluminum–zinc alloy coated,

1.2.4 Aluminum–coated,

1.2.5 Terne (lead-tin alloy) coated, and

1.2.6 Zinc-aluminum-magnesium alloy coated.

1.3 Products covered by this general requirements specification are described in the following product standards: Specifications A308/A308M; A463/A463M; A653/A653M; A755/A755M; A792/A792M; A875/A875M; A929/A929M; and A1046/A1046M.

2. Referenced Documents

A792/A792M-25a	Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A929/A929M-24	Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A1073/A1073M-21	Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
A1063/A1063M-25	Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1057/A1057M-25	Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1046/A1046M-25a	Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A90/A90M-21	Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A370-24a	Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Includes all amendments and changes 10/29/2024).
A463/A463M-25b	Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A653/A653M-25a	Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A700-14(2019)	Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A751-25	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A754/A754M-21	Standard Test Method for Coating Weight [Mass] of Metallic Coatings on Steel by X-Ray Fluorescence
A755/A755M-18(2024)	Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A875/A875M-25a	Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A902-24	Standard Terminology Relating to Metallic Coated Steel Products
A428/A428M-21	Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E376-19	Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
Fed. Std. No. 123	Marking for Shipment (Civil Agencies)
A1079-25	Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A1030/A1030M-21	Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.