Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
Automaticky preložený názov:
Štandardné špecifikácie pre Straight Beam Ultrazvukové vyšetrenie valcovanej ocele, Profily
NORMA vydaná dňa 1.3.2012
Označenie normy: ASTM A898/A898M-07(2012)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.3.2012
Kód tovaru: NS-4705
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
acceptance standards, internal discontinuities, procedure, pulse echo, rolled, shapes, steel, straight beam, structural steel, ultrasonic examination, Discontinuities--steel, Internal discontinuities, Pulse-echo ultrasonic testing, Structural steel (SS) shapes--specifications, Ultrasonic testing--steel, ICS Number Code 77.040.20 (Non-destructive testing of metals)
1. Scope | ||||||
1.1 This specification covers the procedure and acceptance standards for straight beam, pulse echo, ultrasonic examination of rolled structural shapes having a minimum section thickness of ½ in. [12.5 mm]. It was developed to ensure delivery of steel structural shapes free of gross internal discontinuities such as pipe, ruptures, or laminations and is to be used whenever the inquiry, contract, order, or specification states that the shapes are to be ultrasonically examined. Two levels of acceptance standards are included. Level II is intended for normal applications where freedom from gross internal discontinuities is desired, particularly in connection regions. Level I is intended for critical applications such as welded chord members used in tension loading, where internal discontinuities could be detrimental. Level II is normally applicable unless otherwise specified in contract documents or the purchase order. Supplementary requirements for alternative scanning coverages are provided. 1.2 The values stated in either inch-pound or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. |
||||||
2. Referenced Documents | ||||||
|
Historická
15.5.2012
Historická
1.12.2013
Historická
1.7.2009
Historická
1.9.2010
Historická
15.10.2012
Historická
1.12.2011
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-12-22 (Počet položiek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.