Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM A758/A758M-13
Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
Automaticky preložený názov:
Štandardné špecifikácie pre Zámočnícke - Carbon zváranie na tupo , potrubia armatúry s vylepšenou vrubová húževnatosť
NORMA vydaná dňa 1.10.2013
Informácie o norme:
Označenie normy: ASTM A758/A758M-13
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2013
Kód tovaru: NS-4053
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Anotácia textu normy ASTM A758/A758M-13 :
Keywords:
low, pipe fittings, piping applications, pressure containing parts, steel, temperature service applications, ICS Number Code 23.040.40 (Metal fittings)
Doplňujúce informácie
| 1. Scope | |||||||||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers wrought-carbon steel butt-welding seamless or welded fittings specially processed to ensure better notch toughness than that to be expected in fittings manufactured to the requirements of Specification A234/A234M. 1.1.1 Included are elbows, caps, tees, reducers, and other type fittings covered by ASME B16.9. 1.1.2 Heat treatment is required for all fittings. 1.1.3 Fittings with mandatory radiographic examination of welds are included. 1.1.4 Supplementary requirements are provided for use when additional testing or examination is desired. 1.1.5 Cast fittings, and fittings formed from all weld metal, are not included. 1.2 Several type of fittings are
provided, as follows:
1.3 It shall be the responsibility of the purchaser to determine whether material meeting the requirements of this specification is satisfactory for the service application. 1.4 This specification is expressed in both inch-pound units and SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. |
|||||||||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | |||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||
Doporučujeme:
