Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM A513/A513M-19 1.3.2019 náhľad

Doplňujúce informácie

ASTM A513/A513M-19

Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

NORMA vydaná dňa 1.3.2019

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 77.40 € Tlačené - 77.40 €
Dostupnosť	SKLADOM
Cena	77.40 € bez DPH
77.40 €

Informácie o norme:

Označenie normy: ASTM A513/A513M-19
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.3.2019
Kód tovaru: NS-939018
Počet strán: 20
Približná hmotnosť: 60 g (0.13 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Železné a ocelové trubky

Anotácia textu normy ASTM A513/A513M-19 :

Keywords:
alloy steel tube, carbon steel tube, mechanical tubing, resistance welded steel tube, steel tube, welded steel tube,, ICS Number Code 23.040.10 (Iron and steel pipes)

Doplňujúce informácie

1. Scope

1.1 This specification covers electric-resistance-welded carbon and alloy steel tubing for use as mechanical tubing.

1.2 This specification covers mechanical tubing made from hot- or cold-rolled steel.

1.3 This specification covers round, square, rectangular, and special shape tubing.

Type

Size Range
(Round Tubing)

Electric-Resistance-Welded Tubing from Hot-Rolled Steel

outside diameter from ¹/₂ to 15 in.
[10 to 380 mm]

wall from 0.065 to 0.650 in.
[1.65 to 16.50 mm]

Electric-Resistance-Welded Tubing from Cold-Rolled Steel

outside diameter from ³/₈ to 12 in.
[9.5 to 305 mm]

wall from 0.022 to 0.134 in.
[0.56 to 3.40 mm]

1.4 Optional supplementary requirements are provided and when desired, shall be so stated in the order.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. In this specification hard or rationalized conversions apply to diameters, lengths and tensile properties. Soft conversion applies to other SI measurements.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

E309-16	Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
E273-20	Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
A1040-17(2022)	Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
A1039/A1039M-20	Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process
A1011/A1011M-23	Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
E213-22	Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
E570-20	Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
A370-23	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A700-14(2019)	Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
B?46.1	Surface Texture
MIL-STD-129	Marking for Shipment and Storage
Fed. Std. No. 123	Marking for Shipments (Civil Agencies)
A1008/A1008M-23e1	Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable (Includes all amendments and changes 12/29/2023).
A751-21	Standard Test Methods and Practices for Chemical Analysis of Steel Products

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.