Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM A29/A29M-11a

Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for (Includes all amendments And changes 5/23/2012).

Automaticky preložený názov:

Štandardné špecifikácie pre oceľové tyče , Carbon a Alloy , Hot - tepaný , všeobecné požiadavky na

NORMA vydaná dňa 1.10.2011

Jazyk
Prevedenie	Online zabezpečené PDF - 83.10 € Tlačené - 83.10 €
Dostupnosť	SKLADOM
Cena	83.10 € bez DPH
83.10 €

Informácie o norme:

Označenie normy: ASTM A29/A29M-11a
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2011
Kód tovaru: NS-1901
Počet strán: 16
Približná hmotnosť: 48 g (0.11 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Anotácia textu normy ASTM A29/A29M-11a :

Keywords:

alloy steel bars, carbon steel bars, cold finished steel bars, general delivery requirements, hot wrought steel bars, steel bars, Alloy steel bars--specifications, Carbon steel bars/shapes--specifications, Cold-finished steel bars--specifications, General delivery requirements--steel, Hot wrought steel bars--specifications, Steel bars--specifications, ICS Number Code 77.140.60 (Steel bars and rods)

Doplňujúce informácie

1. Scope

1.1 This specification covers a group of common requirements which, unless otherwise specified in the purchase order or in an individual specification, shall apply to carbon and alloy steel bars under each of the following ASTM specifications (or under any other ASTM specification which invokes this specification or portions thereof):

Title of Specification	ASTM Designation^A
Hot-Rolled Carbon Steel Bars:
Steel Bars, Carbon, Quenched and Tempered	A321
Steel Bars and Shapes, Carbon Rolled from “T'' Rails	A499
Steel Bars, Carbon, Merchant Quality, M-Grades	A575
Steel Bars, Carbon, Hot-Wrought, Special Quality	A576
Steel Bars, Carbon, Merchant Quality, Mechanical Properties	A663/A663M
Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties	A675/A675M
Steel Bars for Springs, Carbon and Alloy	A689
Cold-Finished Carbon Steel Bars:
Steel Bars, Carbon and Alloy, Cold-Finished	A108
Cold-Drawn Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements	A311/A311M
Hot-Rolled Alloy Steel Bars:
Steel Bars, Alloy, Standard Grades	A322
Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements	A304
Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered	A434
Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both	A739
Cold-Finished Alloy Steel Bars:
Steel Bars, Alloy, Hot-Rolled or Cold-Finished, Quenched and Tempered	A434
Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components	A696

^A These designations refer to the latest issue of the respective specifications, which appear either in the Annual Book of ASTM Standards, Vol 01.05, or as reprints obtainable from ASTM.

1.2 In case of any conflict in requirements, the requirements of the purchase order, the individual material specification, and this general specification shall prevail in the sequence named.

1.3 The values stated in inch-pound units or SI units are to be regarded as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.4 For purposes of determining conformance to this specification and the various material specifications referenced in 1.1, dimensional values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values in accordance with the rounding method of Practice E29.

Note 1—Specification A29 previously listed dimensional tolerances for cold-finished bars; these are now found in Specification A108.

2. Referenced Documents

A322-24	Standard Specification for Steel Bars, Alloy, Standard Grades
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
A311/A311M-04(2020)	Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A304-20	Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A108-24	Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
E112-25	Standard Test Methods for Determining Average Grain Size
A321-90(2001)	Standard Specification for Steel Bars, Carbon, Quenched and Tempered (Withdrawn 2007)
A751-25	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A739-90a(2022)	Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both (Includes all amendments and changes 3/7/2022).
A700-14(2019)	Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A696-17(2022)	Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A663/A663M-23	Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A675/A675M-14(2025)	Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A576-25	Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A575-20	Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A499-15(2020)	Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
A434/A434M-24	Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A370-26	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A689-25	Standard Specification for Carbon and Alloy Steel Bars for Springs

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.