Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes (Withdrawn 2017)
Automaticky preložený názov:
Štandard Specification pre Electric-Resistance zvárané feritickej legovanej ocele kotlov a rúrkových hadov
NORMA vydaná dňa 1.10.2014
Označenie normy: ASTM A250/A250M-05(2014)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2014
Kód tovaru: NS-1764
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
boiler tube, resistance welded steel tube, steel tube, alloy, superheater tube, welded steel tube, ICS Number Code 23.040.10 (Iron and steel pipes)
1. Scope | ||||||
1.1 This specification2 covers several grades, designated T1, T1a, T1b, T2, T11, T12 and T22, of minimum-wall-thickness, electric-resistance-welded, carbon-molybdenum and chromium-molybdenum alloy-steel, boiler and superheater tubes. 1.2 The tubing sizes and thicknesses usually furnished to this specification are 1/2 to 5 in. [12.7 to 127 mm] in outside diameter and 0.035 to 0.320 in. [0.9 to 8.1 mm], inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification. 1.3 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness. 1.4 An optional supplementary requirement is provided for non-destructive examination for certain ASME applications. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5.1 Within the text, the SI units are shown in brackets. 1.5.2 The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.7.2014
Historická
1.3.2012
Historická
1.3.2012
Historická
1.3.2012
Historická
1.9.2012
Historická
1.4.2010
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-04-29 (Počet položiek: 2 896 215)
© Copyright 2024 NORMSERVIS s.r.o.