API STD 609-ed.9

Anotácia textu normy API STD 609-ed.9 :

API STD 609, 9th Edition, April 2021 - Butterfly Valves: Double-flanged, Lug- and Wafer-type, and Butt-welding Ends

This standard covers design, materials, face-to-face dimensions, pressure-temperature ratings, and examination, inspection, and test requirements for gray iron, ductile iron, bronze, steel, nickel-based alloy, or special alloy butterfly valves.

The following two categories of butterfly valves are included:

• a) Category A—Manufacturer’s rated cold working pressure (CWP) butterfly valves, usually with a concentric disc and seat configuration. Sizes covered are NPS 2 to NPS 60 for valves having ASME class 125 or class 150 flange bolting patterns.

b) Category B—ASME class and pressure-temperature-rated butterfly valves that have an offset seat and either an eccentric or a concentric disc configuration. Sizes covered are listed below:

• — for lug and wafer, class 150 and 300: NPS 2 to NPS 60;
• — for lug and wafer, class 600: NPS 3 to NPS 60;
• — for double-flanged short and long pattern, class 150, 300, and 600: NPS 3 to NPS 60;
• — for butt-welding ends, class 150, 300 and 600: NPS 3 to 60;

Information to be specified by the purchaser is shown in Annex B.

Valve configurations include double-flanged, lug- and wafer-type with facings that permit installation between ASME and MSS flanges and butt-welding ends. Configurations conform to the standards and specifications listed in Section 2. Typical valve construction and nomenclature for valve parts are shown in Annex C.