Plastové potrubní systémy - Trubky z polyethylenu (PE), síťovaného polyethylenu (PE-X) a neměkčeného polyamidu (PA-U) - Zkušební metoda odolnosti proti vnitřnímu tlaku po aplikaci squeeze-offu (Norma k přímému použití jako ČSN).

The information about the standard:

Designation standards: ČSN EN 12106
Classification mark: 643163
Catalog number: 521948
Publication date standards: 1.10.2025
The number of pages: 16
Approximate weight : 48 g (0.11 lbs)
Country: Czech technical standard
Kategória: Technické normy ČSN

Annotation of standard text ČSN EN 12106 (643163):

This document specifies a method to determine the resistance to internal pressure of polyethylene (PE), crosslinked polyethylene (PE-X) and unplasticized (PA-U) pipes to verify the condition of the pipe after being subjected to a squeeze-off procedure.
The equipment and procedure used to prepare the test samples and test parameters are given in this document, i.e.:
a) the diameter and series of the pipe to be tested (see 6.1);
b) the number of test pieces (see 6.2);
c) the parameters for the hydrostatic strength tests (see 7.6).
NOTE 1 - Further information on the squeeze-off procedure is given in EN 12007-2 and ISO/TS 10839 for polyethylene, and CEN/TS 12007-6 for unplasticized polyamide.
NOTE 2 - The squeeze-off procedure is specified to limit gas flow to allow maintenance, repair or to make network connections. Squeeze-off is used in an emergency for pipes carrying other media