NORMSERVIS s.r.o.

ASTM D7293-19

Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)

NORMA vydaná dňa 1.8.2019

Anglicky -
PDF - okamžité stiahnutie (52.70 EUR)

Anglicky -
PDF + redline - ihneď (63.20 EUR)

Anglicky -
Tlačené (52.70 EUR)

Anglicky -
Tlač + redline (63.20 EUR)


Prečo Redline?

Redline predstavuje rýchly a jednoduchý spôsob ako porovnať všetky zmeny medzi aktuálne platnou normou a predchádzajúcou verziou.

Vďaka redline sa okamžite dozviete o:

Ušetrite si čas aj starosti!

Vďaka Redline už nebudete musieť strácať čas zisťovaním, čo sa v novej norme zmenilo. Redline Vám ušetrí čas a zaručí, že sa o zmenách v norme dozviete.

Cena

Ak si zvolíte možnosť "Platná norma + Redline", potom dostanete oba dokumenty! A čo je najlepšie, cena Platné normy + Redline je len o niečo málo vyššia ako cena samostatnej platné normy.

Zobraziť ukážku Redline

:

: ASTM D7293-19
: 1.8.2019
: 6
: 18 g (0.04 )
:
Kategória: Technické normy ASTM

ASTM D7293-19 :

This test method covers requirements and test methods for the material, dimensions, and workmanship, and the properties of extruded and compression-molded sheet, plate, rod and tubular bar manufactured from polyetherimide (PEI) resins. The type of PEI extruded shape shall be categorized by class depending on composition. Every class of PEI shape shall be categorized into one grade for virgin unfilled products. The type and class shall be further differentiated based on dimensional tolerances and dimensional stability (based on elevated temperature excursion testing). Grades 1 and 2 materials are produced with the closest commercial tolerances and lowest stress levels for machined parts. The type, class, and grade is further differentiated based on dimensional stability (elevated temperature excursion test). Tensile strength at break, elongation at break, flexural modulus, izod impact, and tensile modulus (tangent) shall be tested to meet the requirements prescribed. The plate specimens, sheet specimens, rod specimens, and tubular bar specimens shall be tested to meet the requirements prescribed.


Keywords:
PEI, polyetherimide, polyetherimide plates, polyetherimide rod, polyetherimide shapes, polyetherimide tubular bar,, ICS Number Code 83.080.20 (Thermoplastic materials)