NORMSERVIS s.r.o.

ASTM C1107/C1107M-20

Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

NORMA vydaná dňa 1.2.2020

Anglicky -
PDF - okamžité stiahnutie (58.80 EUR)

Anglicky -
PDF + redline - ihneď (70.50 EUR)

Anglicky -
Tlačené (58.80 EUR)

Anglicky -
Tlač + redline (70.50 EUR)


Prečo Redline?

Redline predstavuje rýchly a jednoduchý spôsob ako porovnať všetky zmeny medzi aktuálne platnou normou a predchádzajúcou verziou.

Vďaka redline sa okamžite dozviete o:

Ušetrite si čas aj starosti!

Vďaka Redline už nebudete musieť strácať čas zisťovaním, čo sa v novej norme zmenilo. Redline Vám ušetrí čas a zaručí, že sa o zmenách v norme dozviete.

Cena

Ak si zvolíte možnosť "Platná norma + Redline", potom dostanete oba dokumenty! A čo je najlepšie, cena Platné normy + Redline je len o niečo málo vyššia ako cena samostatnej platné normy.

Zobraziť ukážku Redline

The information about the standard:

Designation standards: ASTM C1107/C1107M-20
Publication date standards: 1.2.2020
The number of pages: 6
Approximate weight : 18 g (0.04 lbs)
Country: American technical standard
Kategória: Technické normy ASTM

Annotation of standard text ASTM C1107/C1107M-20 :

This specification covers packaged dry, hydraulic cement grout (nonshrink) intended for use under applied load where a change in height below initial placement height is to be avoided. Grouts covered are composed of hydraulic cement, fine aggregate, and other ingredients. They require only the addition of mixing water for use. The materials used as ingredients in packaged, dry, grout include hydraulic cement, fine aggregate, and other ingredients. The performance requirements of the specimens are presented in details. Grout mixtures shall be produced using the conditions prescribed. For smaller quantities of grout, the mortar-mixing apparatus shall be as specified. Mixer for grout performance qualifications shall be clean, pre-wetted, and drained and essentially free of hardened mortar and other foreign material that can be removed with a trowel or by reasonably striking with a hammer. The procedures for preliminary adjustment mixing and grout performance qualification are presented in details. Consistency testing shall be performed on the grout mixture. Determine the yield of the grout using the 400-mL cylindrical measure described.


Keywords:
dry hydraulic cement grout, grout, nonshrink hydraulic cement grout, packaged dry grout, shrinkage compensated grout,, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)