Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
NORMA vydaná dňa 1.10.2019
Prečo Redline?
Redline predstavuje rýchly a jednoduchý spôsob ako porovnať všetky zmeny medzi aktuálne platnou normou a predchádzajúcou verziou.
Vďaka redline sa okamžite dozviete o:
Ušetrite si čas aj starosti!
Vďaka Redline už nebudete musieť strácať čas zisťovaním, čo sa v novej norme zmenilo. Redline Vám ušetrí čas a zaručí, že sa o zmenách v norme dozviete.
Cena
Ak si zvolíte možnosť "Platná norma + Redline", potom dostanete oba dokumenty! A čo je najlepšie, cena Platné normy + Redline je len o niečo málo vyššia ako cena samostatnej platné normy.
Designation standards: ASTM B888/B888M-19
Publication date standards: 1.10.2019
The number of pages: 14
Approximate weight : 42 g (0.09 lbs)
Country: American technical standard
Kategória: Technické normy ASTM
This specification establishes the requirements for copper alloy strips for use in the manufacture of electrical connectors or spring contacts produced from one of the following Copper Alloy UNS Nos.: C14530, C15100, C15500, C17000, C17200, C17410, C17450, C17460, C17500, C17510, C19010, C19025, C19210, C19400, C19500, C19700, C23000, C26000, C40810, C40850, C40860, C42200, C42500, C42520, C42600, C50580, C50780, C51000, C51080, C51100, C51180, C51980, C52100, C52180, C52480, C63800, C65400, C68800, C70250, C70260, C70265, C75200, and C76200. The material for manufacture shall be a cast bar, slab, cake, billet, or other form of such composition as to be suitable for processing by either hot- or cold-working to produce the products prescribed in this specification. Products shall be finished by hot working, cold working, annealing, or heat treatment as may be necessary to meet mechanical property requirements, which include tensile strength, yield strength, and elongation. Tempers shall be available in the annealed, rolled, or mill hardened conditions. Products shall also adhere to tolerances as to dimension such as thickness, width, length, straightness, and mass.
Keywords:
coefficient of thermal expansion, density, electrical conductivity, electrical connectors, electrical resistivity, elongation, modulus of elasticity, spring contacts, thermal conductivity, yield strength, UNS No. C14530, UNS No. C15100, UNS No. C15500, UNS No. C17000, UNS No. C17200, UNS No. C17410, UNS No. C17450, UNS No. C17460, UNS No. C17500, UNS No. C17510, UNS No. C19002, UNS No. C19010, UNS No. C19015, UNS No. C19025, UNS No. C19210, UNS No. C19400, UNS No. C19500, UNS No. C19700