NORMSERVIS s.r.o.

ASTM E11-24

Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves

NORMA vydaná dňa 1.2.2024

Anglicky -
PDF - okamžité stiahnutie (69.80 EUR)

Anglicky -
PDF + redline - ihneď (83.70 EUR)

Anglicky -
Tlačené (69.80 EUR)

Anglicky -
Tlač + redline (83.70 EUR)


Prečo Redline?

Redline predstavuje rýchly a jednoduchý spôsob ako porovnať všetky zmeny medzi aktuálne platnou normou a predchádzajúcou verziou.

Vďaka redline sa okamžite dozviete o:

Ušetrite si čas aj starosti!

Vďaka Redline už nebudete musieť strácať čas zisťovaním, čo sa v novej norme zmenilo. Redline Vám ušetrí čas a zaručí, že sa o zmenách v norme dozviete.

Cena

Ak si zvolíte možnosť "Platná norma + Redline", potom dostanete oba dokumenty! A čo je najlepšie, cena Platné normy + Redline je len o niečo málo vyššia ako cena samostatnej platné normy.

Zobraziť ukážku Redline

Informácie o norme:

Označenie normy: ASTM E11-24
Dátum vydania normy: 1.2.2024
Počet strán: 12
Približná hmotnosť: 36 g (0.08 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Anotácia textu normy ASTM E11-24 :

Standard ASTM E11 was completely revised with the -09 revision, and further in subsequent years to apply tolerances in conformance with?truncated Gaussian normal distribution?statistics. It covers the requirements for the sieve cloth itself, and for the design and construction of test sieves that use sieve cloth as a particle sizing medium to classify materials.? This specification incorporates a maximum standard deviation value (where applicable) for the sieve cloth and for the Test Sieves.? The maximum standard deviation values in Table 1 have been corrected by a K factor so as to increase the confidence level of the sieve cloth and the Test Sieve. ? Three (3) different inspection confidence levels are applied for Compliance, Inspection and Calibration Test Sieves; with Calibration Test Sieves having at least twice as many openings measured as Inspection Sieves.? Similar to previous ASTM E11 revisions the specification covers the Test Sieve and its construction; standard frame sizes, non-standard frames, dimensional information, characteristics of the sieve frame, materials of construction for the sieve frame, attachment of the sieve cloth to the sieve frame, and specifies how test sieves should be labeled.? Lastly, the specification Annex discusses in detail the proper procedure for inspection of the sieve cloth and the test sieve, to ensure that it complies with the requirements as shown in Table 1 of the specification.


Keywords:
aperture, calibration sieve, compliance sieve, inspection sieve, opening, particle size, sieve, sieve analysis, sieve cloth, sieve designation, test sieve, woven wire test sieve cloth,, ICS Number Code 19.120 (Particle size analysis. Sieving)