Standard Specification for Solvent Release Sealants
NORMA vydaná dňa 1.6.2022
Prečo Redline?
Redline predstavuje rýchly a jednoduchý spôsob ako porovnať všetky zmeny medzi aktuálne platnou normou a predchádzajúcou verziou.
Vďaka redline sa okamžite dozviete o:
Ušetrite si čas aj starosti!
Vďaka Redline už nebudete musieť strácať čas zisťovaním, čo sa v novej norme zmenilo. Redline Vám ušetrí čas a zaručí, že sa o zmenách v norme dozviete.
Cena
Ak si zvolíte možnosť "Platná norma + Redline", potom dostanete oba dokumenty! A čo je najlepšie, cena Platné normy + Redline je len o niečo málo vyššia ako cena samostatnej platné normy.
Designation standards: ASTM C1311-22
Publication date standards: 1.6.2022
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Kategória: Technické normy ASTM
This specification describes the properties of one-component solvent release sealants for use in building construction. These sealants are generally formulated to withstand a specified maximum joint movement in extension and compression of the nominal joint width. The sealants shall be tested, and is expected to conform to the following physical properties: extrudability after aging, shore A hardness, indentation hardness, bubbling, adhesive and cohesive loss after cyclic movement, slump, stain index, tack-free time, and accelerated weathering (edge cracking, center cracking, adhesion loss, and color change).
Keywords:
accelerated weathering, application life, bubbling, extrusion rate, sealant, sealing compound (sealing material), slump, solvent-release sealant, staining, tack free ,, ICS Number Code 91.100.50 (Binders. Sealing materials)