Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
NORMA vydaná dňa 1.8.2019
Prečo Redline?
Redline predstavuje rýchly a jednoduchý spôsob ako porovnať všetky zmeny medzi aktuálne platnou normou a predchádzajúcou verziou.
Vďaka redline sa okamžite dozviete o:
Ušetrite si čas aj starosti!
Vďaka Redline už nebudete musieť strácať čas zisťovaním, čo sa v novej norme zmenilo. Redline Vám ušetrí čas a zaručí, že sa o zmenách v norme dozviete.
Cena
Ak si zvolíte možnosť "Platná norma + Redline", potom dostanete oba dokumenty! A čo je najlepšie, cena Platné normy + Redline je len o niečo málo vyššia ako cena samostatnej platné normy.
Označenie normy: ASTM A1102-19
Dátum vydania normy: 1.8.2019
Počet strán: 9
Približná hmotnosť: 27 g (0.06 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
This specification applies to technically important, commercially available, magnetically hard sintered (fully dense) permanent magnets commonly known as samarium cobalt (SmCo). SmCo permanent magnets are available in two general composition families abbreviated “SmCo 1:5” and “SmCo 2:17.” These materials have approximate magnetic properties of residual magnetic induction from 0.78 T (7800 G) to 1.18 T (11 800 G) and intrinsic coercivity typically greater than 800 kA/m (10 000 Oe). Special grades and isotropic (un-aligned) magnets can have properties outside these ranges. Specific magnetic hysteresis behavior (demagnetization curve) can be characterized using Test Method A977/A977M.
Keywords:
coercive field strength, magnetic field strength, magnetic flux density, magnetic properties, maximum energy product, permanent magnet, residual induction, samarium cobalt magnet, sintered rare earth magnet,, ICS Number Code 29.100.10 (Magnetic components)