Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM D6237-09

Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

Automaticky preložený názov:

Štandardné Guide Pre maľovanie inšpektorov (betónových a murovaných substráty)

NORMA vydaná dňa 1.2.2009

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 76.90 € Tlačené - 76.90 €
Dostupnosť	SKLADOM
Cena	76.90 € bez DPH
76.90 €

Informácie o norme:

Označenie normy: ASTM D6237-09
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.2.2009
Kód tovaru: NS-34337
Počet strán: 12
Približná hmotnosť: 36 g (0.08 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Anotácia textu normy ASTM D6237-09 :

Keywords:
abrasive blasting, acid treatment (concrete), adhesion, chemical cleaning, coatings, concrete, detergents, inspection, laitance, masonry, moisture, Inspection--coating applications, Moisture analysis--paints/related coatings/materials, Substrates--coating applications, Acid treatment (concrete), Chemical cleaning, Concrete, Inspection personnel/inspectors, Laitance, Abrasive blasting, Masonry substrates, Paint inspectors, ICS Number Code 87.020 (Paint coating processes)

Doplňujúce informácie

Significance and Use

This guide is intended as a reference for those concerned with the inspection of thin- or thick-film coating application to concrete and masonry substrates. It does not cover the application of cement-type coatings. A checklist is included as Appendix X1.1. Many of the details covered may be in a specification for a particular project. A specification for coating projects should include the coatings to be used.

1. Scope

1.1 This guide is intended as an information aid to painting inspectors in carrying out the task efficiently. It includes the key elements of surface preparation, coatings application, and final approval for both field and shop work. The items should be selected that are pertinent to a particular job.

Note 1—For additional helpful information, refer to the following documents:

Manual of Concrete Practice ACI 515R American Concrete Institute

Manual of Coating Work for Light Water Nuclear Power Plant Primary Containment and Other Safety Related Facilities

C 811 Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings

SSPC-PA Guide 3 - A Guide to Safety in Paint Application

Steel Structures Painting Manual Vol. 1- Good Painting Practices

Steel Structures Painting Manual Vol. 2 - Systems and Specifications

Manufacturers Specifications and Instructions (made available to the inspector for reference to special requirements for proper application)

Material Safety Data Sheets (needed to insure that personnel take necessary precautions in handling hazardous materials). Available from Materials manufacturer.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whomever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4 This guide is arranged in the following order:

		Section
Referenced Documents		2
	ASTM Standards	2.1
	OSHA Standards	2.2
	ICRI Standards	2.3
	SSPC Standards	2.4
Significance and Use		3
Preparation for Inspection		4
Surface Preparation Methods and Requirements		5
	Surface Preparation	5.1
	Factors Affecting Coating Performance	5.2
	Surface Condition	5.2.1
	Cleanliness	5.2.2
	Moisture	5.2.3
	Surface Preparation Procedures	5.3
	Dry Surface Cleaning	5.3.1
	Water and Steam Cleaning	5.3.2
	Mechanical Tool Cleaning	5.3.3
	Hand Tool Cleaning	5.3.3.1
	Power Tool Cleaning	5.3.3.2
	Scarifying Machines	5.3.3.3
	Pre- and Post-Surface Preparation	5.3.3.4
	Finished Surface	5.3.3.5
	Blast Cleaning	5.3.4
	Water Blast Cleaning	5.3.5
	Acid Etching	5.3.6
Precautions in Preparing Unpainted and
	Previously Painted Surfaces	5.4
Inspection of Surfaces Prior to Field Painting		5.5
	New Construction	5.5.1
	Maintenance Repainting	5.5.2
Cracks and Voids		6
	Cracks	6.1
	Cracks in Concrete	6.1.1
	Joints in Concrete	6.1.2
	Voids	6.2
	Recoat Intervals	6.3
Coating Storage and Handling		7
	Storage of Coating and Thinner	7.1
	Mixing of Coatings	7.2
	Thinning	7.3
	Initial Samples	7.3.1
	Thinning of Coating	7.3.2
	Sampling of Thinned Coating	7.3.3
	Heating of Coating	7.4
Weather Considerations		8
	Drying	8.1
	Low Temperature	8.2
	High Temperature	8.3
	Moisture	8.4
	Wind	8.5
Coating Application		9
	Residual Contaminants	9.1
	Quality Assurance	9.2
	Film Defects	9.2.1
	Brush Application	9.3
	Spray Application	9.4
	Roller Application	9.5
	Miscellaneous Methods	9.6
	Rate of Application	9.7
	Additional Considerations	10
	Ventilation	10.1
	Painting Schedule	10.2
	Film Integrity	10.3
	Recoat Time	10.4
	Coating System Failure	10.5
Inspection Equipment		11
	General	11.1
	Adhesion of Existing Coating	11.1.1
	Portable Pull-Off Adhesion	11.1.2
	Field Inspection Equipment	11.2
	Drying and Curing Times	11.2.1
	Thermometers	11.2.1.1
	Relative Humidity and Dew Point	11.2.1.2
	Viscosity Cups	11.2.2
	Wet-Film Thickness Gages	11.2.4
	Interchemical Gage	11.2.4.1
	Notched Gage	11.2.4.2
	Dry-Film Thickness Gages	11.2.5
	Destructive Thickness Gage	11.2.5.1
	Nondestructive Film Thickness Gages	11.2.5.2
	Discontinuity (Holiday) Tester	11.3
Inspection Checklist		Appendix X1

2. Referenced Documents

C811-98	Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
D1212-91(2020)	Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
D1475-13(2020)	Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
D3359-23	Standard Test Methods for Rating Adhesion by Tape Test
D4138-07a(2022)	Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means (Includes all amendments and changes 7/1/2022).
D4212-16(2023)	Standard Test Method for Viscosity by Dip-Type Viscosity Cups
D4258-23	Standard Practice for Surface Cleaning Concrete for Coating
D4259-18	Standard Practice for Preparation of Concrete by Abrasion Prior to Coating Application
D4260-23	Standard Practice for Liquid and Gelled Acid Etching of Concrete
D7234-22	Standard Test Method for Pull-Off Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
E1907-06	Standard Guide to Methods of Evaluating Moisture Conditions of Concrete Floors to Receive Resilient Floor Coverings
F1869-23	Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
F2170-19a	Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes (Includes all amendments and changes 1/9/2020).
Guideline No. 03732	Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, and Polymer Overlays Available from International Concrete Repair Institute, 3166 S. River Rd., Suite 132, Des Plaines, IL 60018, http://www.icri.org.
D4262-05(2018)	Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
D4263-83(2018)	Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
D4285-83(2018)	Standard Test Method for Indicating Oil or Water in Compressed Air
D4414-95(2020)	Standard Practice for Measurement of Wet Film Thickness by Notch Gages
D4787-13(2018)	Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
D5064-16a(2021)	Standard Practice for Conducting a Patch Test to Assess Coating Compatibility (Includes all amendments and changes 6/29/2021).
D6132-13(2022)	Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
D6677-18(2022)	Standard Test Method for Evaluating Adhesion by Knife

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.