Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
Automaticky preložený názov:
Štandard Specification pre Ni-Fe-Cr-Mo-Cu-N Low-uhlíkové zliatiny (UNS N08925, UNS N08031, UNS N08354, a UNS N08926) a Cr-Ni-Fe-N Low-Carbon zliatiny (UNS R20033) Bar a Wire, a Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
NORMA vydaná dňa 1.5.2011
Označenie normy: ASTM B649-06(2011)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.5.2011
Kód tovaru: NS-7559
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
UNS N08031, UNS N08925, UNS N08926, UNS N08354, UNS N08936, UNS R20033, bar, wire, Nickel alloy rod/bar/wire--specifications, Nickel-iron alloy--specifications, Nickel-iron-chromium-molybdenum-copper-low carbon alloys--specifications, UNS N08031 (Ni-Fe-Cr-Mo-Cu, Alloy No. 31), UNS N08904 (Ni-Cr-Mo alloy), UNS N08925 (Ni-Fe-Cr-Mo-Cu-low-carbon alloy), UNS N08926 (Ni-Fe-Cr-Mo-Cu-N alloy, low C, N modified), UNS R20033 (Cr-Ni-Fe-Mo austenitic stainless steel, Alloy 33)
1. Scope | ||||||||||||||||
1.1 This specification covers nickel-iron-chromium-molybdenum-copper-nitrogen alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and chromium-nickel-iron-nitrogen low-carbon alloy (UNS R20033) bar and wire, and nickel-chromium-iron-molybdenum-nitrogen alloy (UNS N08936) wire. 1.2 ASTM International has adopted definitions whereby some grades, such as UNS N08904, previously in this specification were recognized as stainless steels, because those grades have iron as the largest element by mass percent. Such grades are under the oversight of ASTM Committee A01 and its subcommittees. The products of N08904 previously covered in this specification are now covered by Specifications A479/A479M and A484/A484M. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Historická
1.3.2008
Historická
1.10.2011
Historická
1.10.2011
Historická
1.10.2011
Historická
1.2.2013
Historická
1.2.2013
Posledná aktualizácia: 2024-05-21 (Počet položiek: 2 903 041)
© Copyright 2024 NORMSERVIS s.r.o.