Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM G63-15
Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
Automaticky preložený názov:
Štandardné Príručka pre hodnotenie nekovových materiálov pre prevádzku s kyslíkom
NORMA vydaná dňa 1.11.2015
Informácie o norme:
Označenie normy: ASTM G63-15
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2015
Kód tovaru: NS-625295
Počet strán: 26
Približná hmotnosť: 78 g (0.17 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM G63-15 :
Keywords:
autogenous ignition temperature, calorimetry, combustion, flammability, friction/rubbing, gaseous fluid impact, heat of combustion, ignition, impact, LOX/GOX compatibility, material evaluation, materials selection, mechanical impact, nonmetallic materials, oxygen index, oxygen service, particle impact, pneumatic impact, promoted ignition/combustion, sensitivity,, ICS Number Code 19.040 (Environmental testing)
Doplňujúce informácie
| Significance and Use | ||||||||||||||||||||||||||||||
|
4.1 The purpose of this guide is to furnish qualified technical personnel with pertinent information for use in selecting materials for oxygen service in order to minimize the probability of ignition and the risk of explosion or fire. It is not intended as a specification for approving materials for oxygen service. |
||||||||||||||||||||||||||||||
| 1. Scope | ||||||||||||||||||||||||||||||
|
1.1 This guide applies to nonmetallic materials, (hereinafter called materials) under consideration for oxygen or oxygen-enriched fluid service, direct or indirect, as defined below. It is intended for use in selecting materials for applications in connection with the production, storage, transportation, distribution, or use of oxygen. It is concerned primarily with the properties of a material associated with its relative susceptibility to ignition and propagation of combustion; it does not involve mechanical properties, potential toxicity, outgassing, reactions between various materials in the system, functional reliability, or performance characteristics such as physical aging, degradation, abrasion, hardening, or embrittlement, except when these might contribute to an ignition. 1.2 When this document was originally published in 1980, it addressed both metals and nonmetals. Its scope has been narrowed to address only nonmetals and a separate standard Guide G94 has been developed to address metals. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1: The American Society for Testing and Materials takes
no position respecting the validity of any evaluation methods
asserted in connection with any item mentioned in this guide. Users
of this guide are expressly advised that determination of the
validity of any such evaluation methods and data and the risk of
use of such evaluation methods and data are entirely their own
responsibility.
Note 2: In evaluating materials, any mixture with oxygen
exceeding atmospheric concentration at pressures higher than
atmospheric should be evaluated from the hazard point of view for
possible significant increase in material
combustibility.
|
||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||
|
Odporúčame:
Aktualizácia technických noriem
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
