Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM F887-18
Standard Specifications for Personal Climbing Equipment
NORMA vydaná dňa 15.11.2018
Informácie o norme:
Označenie normy: ASTM F887-18
Poznámka: NEPLATNÁ
Dátum vydania normy: 15.11.2018
Kód tovaru: NS-909284
Počet strán: 33
Približná hmotnosť: 99 g (0.22 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM F887-18 :
Keywords:
adjustable positioning lanyard, body belts, climber, climbing equipment, dee-rings, energy absorbing lanyard, gate/keeper, harnesses, lanyards, length adjusting device, locking snaphook, positioning strap, stirrup, wood pole fall restriction device,, ICS Number Code 97.220.40 (Outdoor and water sports equipment)
Doplňujúce informácie
| 1. Scope | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1.1 This standard covers the specifications and qualification testing of the following: Climbers, Climber straps, Climber Pads, Climber Footplates, Body Belts, Work Positioning Devices with Locking Snaphooks/Carabiners, Wood Pole Fall Restriction Devices (WPFRD), Arborist Saddle, Harnesses, Energy Absorbing Lanyards. These devices are used by workers in the climbing of poles, trees, towers, and other structures. Minimum performance criteria for arc resistance of harnesses and energy absorbing lanyards are included for workers who may be exposed to thermal hazards of momentary electric arcs or flame. 1.2 Equipment may fall within one of the following categories: 1.2.1 Fall (Travel) Restraint—Prevents a user from being exposed to a fall hazard. 1.2.2 Work Positioning—Allows a 2 ft maximum free fall distance. 1.2.3 Fall Arrest—Allows a 6 ft maximum free fall distance with a maximum arrest force of 1800 lb. Note 1: Under certain conditions and with the use of equipment
designed for such conditions, a 12-ft free-fall distance with a
maximum arrest force of 1800 lb is allowed.
1.2.4 Suspension—Allows 0 free-fall distance while supporting the user’s weight. 1.2.5 Fall Restriction—to prevent or limit free fall from a work position or while ascending/descending a wood pole. 1.3 Three types of climbers, (Types A, B, and C) and two types of climber straps, Types (A and B) are covered. 1.4 Two types of body belts, (Types A and B) are covered. 1.5 Eight types of work positioning devices: three positioning straps, (Types A, B, and C), three adjustable-positioning lanyards, (Types A, B and C) and two nonadjustable positioning lanyards, (Types A and B) are covered. 1.6 Two types of WPFRD, (Types A and AB) are covered. 1.7 Arborist saddle, (Type A) Work Positioning and Suspension are covered. 1.8 Two types of harnesses, (Types A and B) are covered. 1.9 Two types of energy absorbing lanyards, (Types A and B) are covered. 1.10 The values stated in United States customary units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.11 The following safety hazards caveat pertains only to the test method portions, 9.2, 10.3, 11.2, 14.1.4, 15.3, 15.4, 16.2, 17.2, 18.4, 21.2, 22, 23, and 25 of this standard: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.12 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Odporúčame:
Aktualizácia technických noriem
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
