Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Climbing and Mountaineering Carabiners
NORMA vydaná dňa 15.3.2020
Označenie normy: ASTM F1774-20
Dátum vydania normy: 15.3.2020
Kód tovaru: NS-991935
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
This specification covers six mechanical tests and the corresponding minimum performance and design requirements for steel or aluminum alloy carabiners fabricated specifically for the sports of climbing and mountaineering. Two different types of carabiners are defined, namely, non-locking carabiners and locking carabiners. The mechanical tests to which the representative carabiners shall be evaluated on are gate function during body weight test, major axis gate closed 70 % force test, locking mechanism test, major axis gate closed ultimate strength test, major axis gate open ultimate strength test, and minor axis gate closed ultimate strength test. These tests are destructive in nature. Hence, carabiners subjected to any of these tests shall not be used in any way after testing, except in evaluating the results of such testing.
Keywords:
carabiner, ice climbing, mountaineering, rock climbing,, ICS Number Code 97.220.40 (Outdoor and water sports equipment)
1. Scope | ||||||
1.1 This specification covers six mechanical tests and the minimum performance requirements for carabiners designed specifically for the sports of climbing and mountaineering. 1.2 Two different types of carabiners are defined in this standard, non-locking carabiners and locking carabiners. 1.3 Tests contained herein are destructive in nature. Carabiners subjected to any of these tests shall not be used in any way after testing except in evaluating the results of such testing. 1.4 This specification does not imply approval of any method of use of climbing and mountaineering carabiners. In addition, the test load values contained herein are not to be interpreted as the forces which a climbing and mountaineering carabiner may be subjected to, or expected to sustain in actual field use. 1.5 This specification is limited to carabiners made of steel or aluminum alloys only. 1.6 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||
2. Referenced Documents | ||||||
|
Poskytovanie aktuálnych informácií o legislatívnych predpisoch vyhlásených v Zbierke zákonov od roku 1945.
Aktualizácia 2x v mesiaci !
Chcete vedieť viac informácii ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-04-28 (Počet položiek: 2 896 137)
© Copyright 2024 NORMSERVIS s.r.o.