Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM F1314-18

Standard Specification for Wrought Nitrogen Strengthened 22 Chromium-13 Nickel-5 Manganese-2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

NORMA vydaná dňa 1.2.2018

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 58.90 € PDF + redline - ihneď - 70.70 € Tlačené - 58.90 € Tlač + redline - 70.70 €
Dostupnosť	SKLADOM
Cena	58.90 € bez DPH
58.90 €

Informácie o norme:

Označenie normy: ASTM F1314-18
Dátum vydania normy: 1.2.2018
Kód tovaru: NS-809987
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Implantáty pro chirurgii, protetiku a ortotiku

Anotácia textu normy ASTM F1314-18 :

This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 22chromium-13nickel-5manganese-2.5molybdenum stainless steel alloy bar and wire for surgical implants (UNS S20910). Materials shall be tested and shall conform to chemical requirements such as chemical composition, and product analysis; metallurgical requirements such as inclusion; and mechanical requirements such as dimension, tensile strength, yield strength, elongation, and Brinell hardness.

Keywords:
manganese, metals (for surgical implants), nitrogen strengthened, stainless steel, surgical applications,, ICS Number Code 11.040.40 (Implants for surgery, prothetics and orthotics)

Doplňujúce informácie

1. Scope

1.1 This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 22 chromium – 13 nickel – 5 manganese – 2.5 molybdenum stainless steel alloy bar and wire for surgical implants.

1.2 The SI units in this standard are the primary units. The values stated in either primary SI units or secondary inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of each other. Combining values form the two systems may result in non-conformance with the standard.

1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

AMS 2248	Chemical Check Analysis Limits, Corrosion and Heat Resistant Steels and Alloys, Maraging and Other Highly-Alloyed Steels, and Iron Alloys
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
AMS 2632	Ultrasonic Inspection of Thin Materials
A484/A484M-24	Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings
E18-22	Standard Test Methods for Rockwell Hardness of Metallic Materials
E10-23	Standard Test Method for Brinell Hardness of Metallic Materials
E8/E8M-24	Standard Test Methods for Tension Testing of Metallic Materials
A262-15(2021)	Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A555/A555M-23	Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A751-21	Standard Test Methods and Practices for Chemical Analysis of Steel Products
IEEE/ASTM SI 10	American National Standard for Metric Practice
F746-04(2021)	Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
F138-19	Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
E407-23	Standard Practice for Microetching Metals and Alloys
E354-21e1	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys (Includes all amendments and changes 2/23/2022).
E112-13(2021)	Standard Test Methods for Determining Average Grain Size
E45-18a(2023)	Standard Test Methods for Determining the Inclusion Content of Steel (Includes all amendments and changes 11/6/2023).
AMS 2630	Inspection, Ultrasonic Product Over 0.5 inch (12.7 mm) Thick

Doporučujeme:

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.