Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints (Includes all amendments And changes 10/6/2022).
Automaticky preložený názov:
Štandardná skúšobná metóda pre vyťahovanie odpor kravát a kotiev zakotvené v murovacej malty kĺbov
NORMA vydaná dňa 1.10.2014
Označenie normy: ASTM E754-80(2014)e1
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2014
Kód tovaru: NS-47898
Počet strán: 8
Približná hmotnosť: 24 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
anchors, masonry, mortar joints, ties, ICS Number Code 91.060.01 (Elements of buildings in general)
Significance and Use | ||||||||||||||||||
5.1 This test method is intended to provide a simple inexpensive means of generating conservative, comparative data on pullout strengths of various ties and anchors used with different types of masonry units and mortars. This test method is recommended for such use until economical, improved methods can be developed to simulate service conditions more inclusively. |
||||||||||||||||||
1. Scope | ||||||||||||||||||
1.1 This test method provides procedures for determining the ability of individual masonry ties and anchors to resist extraction from a masonry mortar joint. 1.2 Two laboratory testing procedures are provided for use with test specimens which consist of a masonry tie or anchor embedded in mortar between twin stack-bonded masonry units. 1.2.1 Procedure A—For use with small (brick-size) masonry units. 1.2.2 Procedure B—For use with large (block-size) masonry units. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||
|
Posledná aktualizácia: 2024-05-15 (Počet položiek: 2 900 316)
© Copyright 2024 NORMSERVIS s.r.o.