Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Practice for Static Load Testing of Truss Assemblies
Automaticky preložený názov:
Štandardná prax pre statické Load Testing krovu zhromaždenia
NORMA vydaná dňa 1.4.2013
Označenie normy: ASTM E73-13
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2013
Kód tovaru: NS-47822
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
static load, truss, truss assemblies, ICS Number Code 91.080.99 (Other structures)
Significance and Use | ||||||
5.1 This practice provides a guide to any individual, group, agency, or code body on the methods of test for truss assemblies fabricated from all types of construction materials. Sample size is generally kept to a minimum to reduce costs. The methods may be used to apply proof loads to an assembly or to test it to failure. Information obtained includes strength and stiffness data, and if assemblies are tested to their ultimate load carrying capacity, the failure method or mechanism can be observed. |
||||||
1. Scope | ||||||
1.1 This practice is intended as a guide for use in the testing of truss assemblies fabricated from all types of construction materials. While the practice may be used for the testing of a variety of assemblies, it is primarily intended to be used in the testing of those trusses designed to be spaced at 1.2 m centers or greater. It can be used, but it is not normally intended, for the testing of wood residential trussed rafters. Either proof tests or tests to destruction may be run. 1.2 Limitations—It is not intended that this practice be used for routine quality control testing. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Terminology of Building
Constructions Standard Practice for Gravity Load
Testing of Floors and Low Slope Roofs Standard Practice for Reporting Data from
Structural Tests of Building Constructions, Elements, Connections,
and Assemblies |
NEPLATNÁ
1.1.1978
NEPLATNÁ
1.1.1979
NEPLATNÁ
1.7.1989
NEPLATNÁ
1.1.1982
NEPLATNÁ
1.1.1982
NEPLATNÁ
1.7.1986
Chcete mať istotu o platnosti využívaných predpisov?
Ponúkame Vám riešenie, aby ste mohli používať stále platné (aktuálne) legislatívne predpisy
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-05-15 (Počet položiek: 2 900 316)
© Copyright 2024 NORMSERVIS s.r.o.