Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture (Withdrawn 2021) (Includes all amendments And changes 1/25/2021).
Automaticky preložený názov:
Štandardné metódy pre skúšanie Hydraulické rozprašovacích trysiek používaných v poľnohospodárstve
NORMA vydaná dňa 1.10.2012
Označenie normy: ASTM E641-01(2012)e1
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2012
Kód tovaru: NS-47473
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
ICS Number Code 65.060.40 (Plant care equipment)
Significance and Use |
3.1 The purpose of these methods is to provide uniform testing procedures for evaluating the performance criteria of hydraulic spray nozzles used for agricultural purposes. 3.2 The procedures set forth in these methods are for spray nozzles of the hydraulic energy type in which the spray material is forced through an orifice under pressure, providing fluid break-up into droplets. 3.3 Droplet producing nozzles that operate by means other than hydraulic energy are not applicable to these methods. |
1. Scope |
1.1 These methods cover procedures for testing hydraulic spray nozzles used in agriculture. The methods herein cover the following performance parameters: nozzle flow rate, nozzle spray angle, liquid distribution, spray droplet size, and nozzle wearability. 1.2 These methods are applicable to hydraulic spray nozzles which produce the following spray patterns: flat-fan, hollow cone, and full cone. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
30.6.2013
31.5.2007
31.12.2008
31.12.2008
5.3.2004
5.3.2004
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-05-03 (Počet položiek: 2 896 946)
© Copyright 2024 NORMSERVIS s.r.o.