Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Practice for Assessing and Qualifying Candidates as Inspectors of Firestop Systems and Fire-Resistive Joint Systems
NORMA vydaná dňa 1.10.2020
Označenie normy: ASTM E3038-20
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2020
Kód tovaru: NS-1008100
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
firestop, fire-resistive, fire barrier, inspection, inspector, joint, perimeter joint,, ICS Number Code 13.220.01 (General standards related to fire protection)
Significance and Use | ||||||||||||||||||||||||||||||||||||
5.1 This Practice is intended to provide a means for the AHJ or AA, or both, to verify evidence of a candidate’s experience, knowledge, and qualifications. 5.2 This Practice is not intended to set forth individual credentials for an AHJ or AA, or both. 5.3 This Practice is not intended to establish any performance criteria of firestop systems or fire-resistive joint systems. Note 4: The performance criteria of a firestop system or
fire-resistive joint system is found in many national and
international test methods. Some of these methods include, but are
not limited to, Test Method E814, UL 1479, ISO 10295-1, Test Method
E1966, UL 2079, ISO 10295-2,
Test Method E2307, Test
Method E2837, etc.
|
||||||||||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||||||||||
1.1 This practice is intended to assist an authority having jurisdiction (AHJ) or authorizing authority (AA), or both, in establishing minimum qualifications for candidates who desire to conduct inspections in compliance with Practices E2174 and E2393. Note 1: Authority having jurisdiction (AHJ) is defined in
Practices E2174 and
E2393.
Note 2: Authorizing authority (AA) is defined in Practices
E2174 and E2393. Examples of the AA include, but
are not limited to, the responsible architect, engineer, building
owner, or their representative.
1.2 This practice makes available a procedure for a candidate to provide evidence to the AHJ or AA, or both, of their specialized knowledge and technical competence related to the firestop industry. 1.3 This practice determines the technical proficiency of a candidate based upon a minimum amount of education, experience, and knowledge possessed, which is needed to ensure candidate competence to conduct inspections in compliance with Practices E2174 and E2393. 1.4 The purpose of this practice is to allow the AHJ or AA, or both, to assess the ability of the candidate to comprehend and use inspection documents to conduct inspections in compliance with Practices E2174 and E2393. Note 3: Inspection document is defined in Practices
E2174 and E2393. The firestop submittal, when
approved for use, should have sufficient details, including, but
not limited to, the firestop manufacturer’s product data, a design
listing of the tested firestop, and when required a judgment
(Alternative Means and Methods). The judgment is commonly referred
to as an “Engineering Judgment” in the firestop industry. These
judgments are not always issued by an engineer or a registered
design professional.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||
|
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-05-15 (Počet položiek: 2 900 316)
© Copyright 2024 NORMSERVIS s.r.o.