Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
Automaticky preložený názov:
Štandardná testovacia metóda merania priehybov s nízkou hmotnosťou Deflectometer (LWD)
NORMA vydaná dňa 1.9.2015
Označenie normy: ASTM E2583-07(2015)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.9.2015
Kód tovaru: NS-622663
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
deflection surveys, deflection testing, Falling Weight Deflectometer (FWD), Light Weight Deflectometer (LWD), impulse deflection testing, load-deflection testing, Nondestructive testing (NDT), pavement deflection, pavement testing, pavement layer modulus, pavement layer stiffness, Portable Falling-Weight Deflectometer (PFWD),, ICS Number Code 93.080.10 (Road construction)
Significance and Use | ||||||
4.1 This test method covers the determination of surface deflections as a result of the application of an impulse load. The resulting deflections are measured at the center of the applied load and may also be measured at various distances away from the load. Deflections may be either correlated directly to pavement performance or used to determine in-situ material characteristics of the pavement layers. Some uses of data include quality control and quality assurance of compacted layers, structural evaluation of load carrying capacity, and determination of thickness requirements for highway and airfield pavements (see Guide D4695). Note 1: Since pavement and subgrade materials may be stress
dependent, care must be taken when analyzing LWD test data on
unbound materials so that the applied stress will closely match the
stress value applied by the design wheel load at the pavement
surface.
Note 2: The volume of the pavement and subgrade materials
affected by the load is a function of the magnitude of the load.
Therefore, care must be taken when analyzing the results, since the
data obtained by the LWD may be obtained from a smaller volume of
the unbound materials than under the influence of a heavy moving
wheel load at the pavement surface.
|
||||||
1. Scope | ||||||
1.1 This test method covers the determination of deflections of paved and unpaved surfaces with a Light Weight Deflectometer (LWD). This device is also referred to as a Portable Falling-Weight Deflectometer (PFWD). The LWD is lightweight, portable and generally used for testing unbound pavement layers. The deflections measured using an LWD can be used to determine the stiffness of bound and unbound pavement surfaces using appropriate back- or forwardcalculation analysis techniques. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
2. Referenced Documents | ||||||
|
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-05-05 (Počet položiek: 2 897 047)
© Copyright 2024 NORMSERVIS s.r.o.