Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
NORMA vydaná dňa 1.4.2018
Označenie normy: ASTM E2403-06(2018)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2018
Kód tovaru: NS-847269
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
ash, residue on ignition, sulfated ash, thermogravimetric analysis, thermogravimetry,, ICS Number Code 71.040.40 (Chemical analysis)
Significance and Use | ||||||||||||||||||
5.1 The sulfated ash may be used to indicate the level of known metal-containing additives or impurities in an organic material. When phosphorus is absent, barium, calcium, magnesium, sodium and potassium are converted to their sulfates. Tin and zinc are converted to their oxides. 5.2 This test method may be used for research and development, specification acceptance, and quality assurance purposes. |
||||||||||||||||||
1. Scope | ||||||||||||||||||
1.1 This test method describes the determination of sulfated ash content (sometimes called residue-on-ignition) of organic materials by thermogravimetry. This test method converts common metals found in organic materials (such as sodium, potassium, lithium, calcium, magnesium, zinc, and tin) into their sulfate salts permitting estimation of their total content as sulfates or oxides. The range of this test method is from 0.1 to 100 % metal content. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||
|
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-04-28 (Počet položiek: 2 896 137)
© Copyright 2024 NORMSERVIS s.r.o.