Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM E1893-15

Standard Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments to Support Unrestricted Release from Further Regulatory Controls

Automaticky preložený názov:

Štandardné Sprievodca pre výber a používanie prenosných rádiologických Survey prístroje pre Performing in situ rádiologické posúdenie na pomoc Neobmedzená prepustenie z ďalších regulačných Controls

NORMA vydaná dňa 1.2.2015

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 100.60 € Tlačené - 100.60 €
Dostupnosť	SKLADOM
Cena	100.60 € bez DPH
100.60 €

Informácie o norme:

Označenie normy: ASTM E1893-15
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.2.2015
Kód tovaru: NS-584384
Počet strán: 27
Približná hmotnosť: 81 g (0.18 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Měření radiace

Anotácia textu normy ASTM E1893-15 :

Keywords:
ICS Number Code 17.240 (Radiation measurements)

Doplňujúce informácie

Significance and Use

4.1 The purpose of this standard is to provide the user information and guidance for selecting and using instrumentation that will provide measurement results that can be compared to criteria for unrestricted use.

4.2 Use of this standard will provide greater assurance that the measurements obtained will be technically and administratively sufficient for making decisions regarding completion of decontamination and/or demolition/removal activities.

4.3 Use of this standard will provide greater assurance that the measurements obtained will be technically and administratively sufficient to meet all applicable regulatory requirements for unrestricted release of a component for recycle or reuse, or for unrestricted release of a remaining surface or area.

1. Scope

1.1 This standard provides recommendations on the selection and use of portable instrumentation that is responsive to levels of radiation that are close to natural background. These instruments are employed to detect the presence of residual radioactivity that is at, or below, the criteria for release from further regulatory control of a component to be salvaged or reused, or a surface remaining at the conclusion of decontamination and/or decommissioning.

1.2 The choice of these instruments, their operating characteristics and the protocols by which they are calibrated and used will provide adequate assurance that the measurements of the residual radioactivity meet the requirements established for release from further regulatory control.

1.3 This standard is applicable to the in situ measurement of radioactive emissions that include:

1.3.1 alpha

1.3.2 beta (electrons)

1.3.3 gamma

1.3.4 characteristic x-rays

1.3.5 The measurement of neutron emissions is not included as part of this standard.

1.4 This standard dose not address instrumentation used to assess residual radioactivity levels contained in air samples, surface contamination smears, bulk material removals, or half/whole body personnel monitors.

1.5 This standard does not address records retention requirements for calibration, maintenance, etc. as these topics are considered in several of the referenced documents.

1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

2. Referenced Documents

C998-17	Standard Practice for Sampling Surface Soil for Radionuclides
C999-17	Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
C1133-03	Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
E170-23	Standard Terminology Relating to Radiation Measurements and Dosimetry
E181-23	Standard Guide for Detector Calibration and Analysis of Radionuclides in Radiation Metrology for Reactor Dosimetry
C1215-18	Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
NCRP Report No. 57	Instrumentation and Monitoring Methods for Radiation Protection, National Council on Radiation Protection and Measurements, May 1978 National Council on Radiation Protection and Measurement, 7910 Wodmont Ave., Bethesda, MD 20814
ANSI N42.17C	American National Standard for Performance Specifications for Health Physics Instrumentation-Portable Instrumentation for Use in Extreme Environmental Conditions
ANSI N42.17A	American National Standard for Performance Specifications for Health Physics Instrumentation-Portable Instrumentation for Use in Normal Environmental Conditions
ANSI N323AB	American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instrumentation Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.
ISO-8769	Reference Sources for the Calibration of Surface Contamination Monitors - Beta Emitters (Maximum Beta Energy Greater than 0.15 MeV) and Alpha Emitters, International Organization for Standardization, 1988
ISO-6980-2	: 2005 Nuclear energy - Reference beta particle radiation - Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
ISO-4037-4	: 2004 X and Gamma Reference Radiations for Calibrating Dosimeters and Dose-rate Meters and for Determining their Response as a Function of Photon Energy, International Organization for Standardization, 1979 Available from ANSI Sales Department, 1430 Broadway, New York, NY 10018.
C1000-19	Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
NCRP Report No. 112	Calibration of Survey Instruments Used in Radiation Protection for the Assessment of Ionizing Radiation Fields and Radioactive Surface Contamination, National Council on Radiation Protection and Measurements, December 1991
ISO-7503-2	Evaluation of Surface Contamination - Part 2: Tritium Surface Contamination, International Organization for Standardization, 1988
ISO-7503-1	Evaluation of Surface Contamination - Part 1: Beta Emitters (Maximum Beta Energy Greater than 0.15 MeV) and Alpha Emitters, International Organization for Standardization, 1988
DOE G441.1-1B	Radiation Protection Programs Guide for Use with Title 10, Code of Federal Regulations, Part 835, Occupational Radiation Protection, Chapter 9, Portable Monitoring Instrument Calibration, 3/1/2007
ISO-7503-3	: 2003 Evaluation of Surface Contamination - Part 3: Isomeric Transition and Electron Capture Emitters, Low Energy Beta Emitters (Emax 0.15 MeV), International Organization for Standardization, 1993 (draft)
NCRP Report No. 58	A Handbook of Radioactivity Measurement Procedures, National Council on Radiation Protection and Measurements, 2nd Ed. February 1985
ISO 8769-2	: 1996 Reference sources for the calibration of surface contamination monitors-Part 2: Electrons of energy less than 0.15 MeV and photons of energy less than 1.5 MeV

Podobné normy:

ASTM C1068-03(2011)..

Historická
1.6.2011

ASTM C1343-11

Historická
1.2.2011

ASTM C1673-10ae1..

Historická
1.11.2010

ASTM C1718-10

Historická
1.1.2010

ASTM C1726/C1726M-10..

Historická
1.3.2010

ASTM D3648-14

Historická
1.1.2014

Odporúčame:

Aktualizácia zákonov

Chcete mať istotu o platnosti využívaných predpisov?
Ponúkame Vám riešenie, aby ste mohli používať stále platné (aktuálne) legislatívne predpisy
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.