Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM D7920-15e1 1.8.2015 náhľad

Doplňujúce informácie

ASTM D7920-15e1

Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography (Includes all amendments And changes 1/20/2021).

Automaticky preložený názov:

Štandardná testovacia metóda pre stanovenie Fuel metanolu ( M99 ) a metanol palivovej zmesi ( M10 až M99 ) plynovou chromatografiou

NORMA vydaná dňa 1.8.2015

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 76.90 € Tlačené - 76.90 €
Dostupnosť	SKLADOM
Cena	76.90 € bez DPH
76.90 €

Informácie o norme:

Označenie normy: ASTM D7920-15e1
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.8.2015
Kód tovaru: NS-615126
Počet strán: 12
Približná hmotnosť: 36 g (0.08 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Tekutá paliva

Anotácia textu normy ASTM D7920-15e1 :

Keywords:
fuel methanol, impurities in methanol, methanol content in gasoline, methanol fuel, methanol-gasoline blends,, ICS Number Code 75.160.20 (Liquid fuels)

Doplňujúce informácie

Significance and Use

5.1 Methanol is used in blends with gasoline at levels of 70 % to 85 % by volume, as specified in Specification D5797. This test method provides a quantitative approach to measure the methanol content in methanol fuel blends, from 10 % to 99 % by volume. The usual concentration is 70 % to 85 % by volume (M70 to M85). The method is also used to analyze fuel methanol (M99) prior to blending.

1. Scope

1.1 This test method covers the determination of the methanol content, by gas chromatography, of M10 to M99 in methanol fuel blends, including fuel methanol (M99).

1.1.1 Methanol may be determined from 10 % to 99 % by volume.

1.2 This test method is designed to measure not only methanol in the blended gasoline but also the impurities in fuel methanol (M99) itself in the range of 5 mg/kg to 1000 mg/kg. However, not all impurities are measured nor detected by this test method.

1.2.1 Water cannot be determined by this test method and shall be measured by a procedure such as Test Method D1364 and the result used to correct the concentrations determined by this test method.

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E594-96(2019)	Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
D6299-23a	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance (Includes all amendments and changes 12/12/2023).
D4307-17(2021)	Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
D4175-23a	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants (Includes all amendments and changes 12/21/2023).
E355-96(2021)e1	Standard Practice for Gas Chromatography Terms and Relationships (Includes all amendments and changes 4/28/2021).
D4814-23a	Standard Specification for Automotive Spark-Ignition Engine Fuel (Includes all amendments and changes 12/14/2023).
D5797-21	Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
D4057-22	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
D1364-22	Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E1064-24	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
E1510-95(2021)	Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
D4626-23	Standard Practice for Calculation of Gas Chromatographic Response Factors

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.