Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
NORMA vydaná dňa 1.10.2018
Označenie normy: ASTM D6645-18
Dátum vydania normy: 1.10.2018
Kód tovaru: NS-904434
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
branching, comonomer, FTIR, infrared spectrophotometry, polyethylene,, ICS Number Code 19.100 (Non-destructive testing), 83.080.20 (Thermoplastic materials)
Significance and Use | ||||||||||||||||||||||||
5.1 This method determines the number of branches (that is, comonomer content) in copolymers of ethylene with 1-butene, 1-hexene or 1-octene. This information can be correlated with physical properties such as melting point, density, and stiffness, all of which depend on the degree of crystallinity of the polymer. Differences in the comonomer content thus can have a significant effect on the final properties of products made from these resins. |
||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||
1.1 This test method covers the determination of methyl groups (that is, comonomer content) in polyethylenes by infrared spectrophotometry. The test method is applicable to copolymers of ethylene with 1-butene, 1-hexene, or 1-octene having densities above 900 kg/m3. High-pressure low-density polyethylenes (LDPE) and terpolymers are excluded. 1.2 The values stated in SI units, based on IEEE/ASTM SI-10, are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Note 1: There is no known ISO equivalent to this
standard.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||
|
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-05-06 (Počet položiek: 2 897 584)
© Copyright 2024 NORMSERVIS s.r.o.